User manual SONY LFA-PC20

[. . . ] Registering your computer to another Base Station . The screen shots used in this manual are only example images. LocationFree allows you to watch TV programs or recorded video from any room in your home, or even away from home. You can transmit video from a Base Station which is connected to a DVD recorder (or other devices) to a device such as a computer or PSPTM via a wireless network or the Internet. [. . . ] Take care not to move the remote while pressing the button. If you cannot find your external device in the list, you can download the Additional Remote Control Data from Additional Remote Control Data Download Service site. Before you begin: Once the software has been installed, you will have the necessary shortcut to the folder 'LocationFree RC_DATA' on your desktop. Click anywhere in the window to display the bottom bar, then select [Settings] at the bottom of the window. Repeat the steps 5 and 6 on all the buttons you want to learn. You can learn the button with a red frame. Click anywhere in the window to display the bottom bar, then select [Settings] at the bottom of the window. You can download the Additional Remote Control Data of your device from the Additional Remote Control Data Download Service site, and then save the file into the `LocationFree RC_DATA' folder. You can set up the on-screen remote control in following two way. ⷠSelecting the on-screen remote control manually from the list by make and type (1 page 17) · Selecting the on-screen remote control using the remote of your device (1 page 17) Your computer must be connected to the Internet to download the Additional Remote Control Data. ⷠFor more detail information and settings, please refer to the following website: http://www. You can adjust the picture settings, such as brightness, color, etc. The adjustments are applied to both videos. Move the slide bar or click [-][+]/[R][G] to adjust the picture settings. when you want to reset the settings , click [Standard]. You can adjust the following settings: Click anywhere in the window to display the bottom bar, then select [Settings] at the bottom of the window. When the [Color System] option is set to PAL, the [Hue] option is not available. When you switch the [Color System] option from PAL to NTSC or vice versa, the change is activated after reconnecting. You can adjust the picture settings only while connected to the Base Station LF-B20. If you want to watch NTSC video, you need to configure the color system settings. Click anywhere in the window to display the bottom bar, then select [Settings] at the bottom of the window. You can automatically connect to the Base Station when you launch the LocationFree Player. [. . . ] For details on these settings, refer to the instruction manual for the wireless LAN device, such as your computer or wireless LAN card. If so, the firewall function of the security software may be causing the connection to be disconnected. ⷠProblems with the Internet connection may cause the connection to be disconnected. Watching Video Away from Home Problem The video keeps stopping and starting, and frames are dropped. [. . . ]