User manual SONY LIB-162

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. To prevent fire or shock hazard, do not expose the unit to rain or moisture. The mains plug on this equipment must be used to disconnect mains power. [. . . ] Use the V and v buttons to select "YES", then press the [ENTER] button. Press the [CANCEL] button twice to return to the status display. If you selected "YES" above and use cartridges without R-MIC, initialization after turning on the library or using the cartridges becomes unusually long. To extenuate this problem, use cartridges compatible with R-MIC or make the setting above "NO". While pressing the [MENU] button, press the V and v buttons to adjust LCD contrast, then press the [ENTER] button. As you make the contrast adjustment, watch the appearance of characters displayed on the LCD panel. Press the [CANCEL] button twice to return to the status display. Depending on your software, you can elect to activate the sequential mode in "Sequential Mode" of the Configuration Menu. By activating the sequential mode, you can use the software to automatically instruct the library to return an ejected cartridge to its original slot and insert the next cartridge into the AIT drive. You can also adjust the settings so that if the library finds no cartridge in the next slot it inserts the next cartridge in the sequence is inserted in the AIT drive. You must use customized software to be able to use this function. You can only make continuous unloading settings when the sequential mode is active. When the "Sequential Mode" setting blinks, use the V and v buttons to select "YES", then press the [ENTER] button. If you do not want use the sequential mode, leave this setting to "NO". When the "Unload Continue" setting blinks, use the V and v buttons to select "YES", then press the [ENTER] button. If you do not want use the continuous unloading function, leave this setting to "NO". If you do not set "Sequential Mode" in step 4 to "YES", you cannot change the "Unload Continue" setting. Press the [CANCEL] button twice to return to the status display. To prevent accidentally pressing the power standby switch and the control buttons, you can disable the buttons on the front panel. If the library power is turned off with the power switch on the rear panel, the "Key Operation" setting is returned to "Enable". An element is a physical location where a cartridge can be kept. Applications use element addresses to differentiate between the elements of the AIT library. [. . . ] The host computer uses these SCSI IDs to differentiate between the devices. Also, the SCSI IDs are used to prioritize the order of communication when several devices are communicating with the host computer. The SCSI ID of a device has nothing to do with its physical location. Now, the AIT library can supply electric power to the terminator. [. . . ]