User manual SONY LOCATIONFREE PLAYER PAK LF-PK1 QUICK START GUIDE

[. . . ] 2-655-613-11(2) If you have additional questions related to the use of this product after reading this Quick Start Guide and the Operating Instructions, please call our LocationFreeTM Customer Support. LocationFreeTM Customer Support 1-866-925-SONY (7669) - U. S. [. . . ] 3 [I accept the terms in the license Read the license agreement, select agreement], and then click [Next]. folder, 5 Confirm the installation you want and then click [Next]. If to modify the installation folder, click [Change] and select a folder. Connect to Your TV Signal, Other AV Devices and the Internet, and Turn On the Base Station. 1 Attach the base station stand. Holes 2-c Connect to other devices (such as DVD players, etc. ). Stand Base station rear panel to 4 Connect Forthe Internet. details, see the connection examples in STEP 2. 5 Connect the power cord to the base station. AC-LX1B AC power adapter (supplied). Front Claws 2 Connect to a TV antenna, set top box (STB), or other devices. Connect to a TV antenna. or 2-a 2-b 3 Connect the IR Blaster so it faces the infrared receiver on the external device. You can also connect to the IN 2 terminal. IR Blaster Infrared transmitter Infrared receiver Power cord (supplied) Connect to a set top box (STB). TV antenna Antenna cable (not supplied) or 6 External device (VCR, DVD players, etc. ) Turn on the power. Antenna cable (not supplied) Lights Cable outlet POWER LED STB STEP 2 Setup to Watch TV at Home Put the Base Station into Setup Mode (Registration Possible) Connect to watch TV away from home Press the SETUP MODE button on the rear panel of the base station. Keep the button held down until the SETUP MODE LED starts blinking. Connect Your Computer to the Base Station Connect to watch TV at home · Connect to the router by wireless Modem without router function Modem with internal router * To determine the type of your modem, check with your Internet service provider. Make TV and Video Settings with the LocationFreeTM Player Configure the TV channels 1 2 STEP 3 1 2 Make Easy Setup Settings for the Base Station with Your Computer If you are already connected via NetAV, disconnect before making the following settings. To connect your computer to the base station with a router, put the base station into Setup Mode (See STEP 2). Start LocationFreeTM Player, and then click [Base Station Settings] in the [Base Station Selection] window. To connect your computer to the base station with a router z Tip to Internet · Connect to the router by wired LAN Make all settings up to "STEP 2: Connecting Your Computer to the Base Station to Watch TV" while the SETUP MODE LED is blinking. The Setup Mode (registration possible) is available for 5 minutes. If the SETUP MODE LED stops blinking, keep pressing the SETUP MODE button again until the SETUP MODE LED starts blinking. Router (UPnP Compatible) DSL or cable modem Base station * In the Setup Mode, the wireless LAN operates on the 2. 4 GHz channel. · Connect to the router by wireless DSL or cable modem with internal router (UPnP compatible) to Internet Connect Your Computer to the Base Station to Watch TV 1 2 Double click the icon on the desktop to start LocationFreeTM Player. · Connect to the router by wired LAN to LAN port Hub or wireless access point (without router function) While the SETUP MODE LED is blinking, select a base station from the list, choosing one with a green icon, and then click [Connect]. Green icon Check the base station NETWORK LED. Check whether the base station NETWORK LED is turned on. When not turned on: Make sure the router power is turned on and the LAN cable is connected correctly. If the SETUP MODE LED is not blinking, press the SETUP MODE button again to switch to Setup Mode (registration possible). 3 When the message "Registration completed. [. . . ] User ID (User name) : lfx Initial password: WebPassword printed on the label affixed to the side of the base station. z Tip If [Setup Incomplete] appears in the [NetAV Check] page, read the explanation on the NetAV check page, and then make the necessary settings. Your web browser starts, and the [Base Station Settings] page opens. Follow the on-screen instructions to proceed to the NetAV check. In the [NetAV Setup] page, read the supplied Dynamic DNS Terms-of-Use Agreement and then click [Agree]. [. . . ]