User manual SONY M-535V

[. . . ] The sound drops out or comes with excessive noise. Tape speed is too fast or too slow in the playback mode. [. . . ] A: provided or supplied --: not provided or not supplied Choose one of the following power sources. Insert the # side first for each battery. 4 cm for optimum sound (recommended for normal use): A 30-minute recording can be made using both sides of the MC-30 microcassette. 2 cm for longer recording time: A 60-minute recording can be made using both sides of the MC-30 microcassette. set VOR to H , L or OFF (M-535V/530V only). If you set VOR to H or L, the unit automatically starts recording the sound and pauses when there is no sound (you can save tapes and batteries). H: To record at meeting or in a quiet and/or spacious place. l: To record for dictation or in a noisy place. When the sound is not loud enough, set it to OFF, or the unit may not start recording. While the tape runs, the REC/BATT lamp lights and flashes depending on the strength of the sound (M-535V/530V only). Press or slide xZ z during playback (the unit becomes in the recording mode) Push up mCUE/MREVIEW toward MREVIEW during the recording. Connect another tape recorder to the EAR jack using the RKG64HG connecting cord (not supplied). Set this unit to the playback mode and another tape recorder to the recording mode. Use only the (standard microcassettes) with this unit. [. . . ] Away from the unit to prevent possible damage from the magnet used for the speaker. â· When you do not use the unit for long, remove the batteries to avoid damage caused by battery leakage and subsequent corrosion. [. . . ]