User manual SONY M-729V

[. . . ] n Improper setting of the TAPE SPEED switch. Set it to the same speed as that used for recording. Tape speed is faster than the normal playback speed. This warranty is valid only in the United States. [. . . ] Use the AC power adaptor (supplied with M-679V only)or the AC-E30HG AC power adaptor (not supplied). Make sure that nothing is connected to MIC. Press or slide p6 r during playback (the unit becomes in the recording mode) Push up 0CUE/)REVIEW toward )REVIEW during the recording. 1 Insert a cassette with the side to start playing facing the lid. 2 Select the tape speed to the same speed as that used for recording. Make sure that nothing is connected to the DC IN 3V jack. 2 Insert two size AA (R6) batteries with correct polarity and close the lid. 4 cm tape speed for recording, if you play back the recorded tape with another unit. Otherwise, the sound quality may be changed. If you cannot get the desired results, set VOR to OFF. â· When you use the system in a noisy place, the unit will stay in the recording mode. If the sound is too soft, on the contrary, the unit will not start recording. Charge the rechargeable batteries only with the supplied charge adaptor and the AC power adaptor. the rechargeable batteries can be charged approximately 500 times. Be sure to charge the rechargeable batteries for approximately 8 hours before using them. The unit can be used for recording for approximately 5. The instructions in this manual are for the M-629V, M-679V and M-729V. Before you start reading, check your model number. the M-729V is the model used for illustration purposes. Any differences in operation are clearly indicated in the text, for example, "M-729V only". When to replace the batteries Replace the batteries with new ones when the BATT lamps go off and the i lamp flashes. To prevent a cassette from being accidentally recorded over Break out and remove the cassette tabs. [. . . ] â· During cue and review, the beep sounds differently. â· The beep may sound differently depending on the marked position on the tape because the winding speed varies from the beginning to the end of the tape. Search backward during playback (REVIEW) * If you leave the unit after the tape has been wound or rewound, the batteries will be consumed rapidly. ** The tape moves faster in the rewind/REVIEW mode than in the fast forward/CUE mode. [. . . ]