User manual SONY MCE-F11

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Place the player in a location with adequate ventilation to prevent heat build-up in the player. ⷠDo not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom. ⷠDo not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. [. . . ] A disc is divided into sections of a picture or a music piece called "tracks. " Each track is assigned with a track number to locate the track you want. Index number "PBC" is displayed while playing a VIDEO CD with PBC functions. The track numbers in the music calendar disappear after they are played. While playing a VIDEO CD with PBC functions, the track numbers and the music calendar aren't displayed. However, while the menu screen is displayed on the TV screen, the item numbers you can select in the menu appear in the music calendar. Note that you cannot select some item numbers even if they appear in the music calendar. The player memorizes the point you stopped a VIDEO CD and you can resume playback from that point. Resume Play is not cancelled whenever you turn off the player. You cannot start Resume Play if "RESUME" is not shown in the front panel display. Note that Resume Play is not available while playing an audio CD. You can quickly locate any scene or track while playing a disc using the =/+ (AMS: Automatic Music Sensor) buttons or number buttons. Note that while playing a VIDEO CD with PBC functions, this function is available only during playback without PBC functions (PBC OFF, page 10). If "RESUME" doesn't appear, Resume Play is not available. press · The player starts playback from the point you stopped the VIDEO CD in Step 1. To view from the beginning of the VIDEO CD When "RESUME" appears in the front panel display, press p, then press · The next or subsequent scenes or tracks (AMS) Z The current or preceding scenes or tracks (AMS) Z A specific track directly + repeatedly until you find the scene or track = repeatedly until you find the scene or track Number button of the track Depending on where you stopped the CD, the player may resume playback from a different point. ⷠThe point at which you stopped playing is cleared when: ­ you press number buttons or PLAY MODE ­ you remove the VIDEO CD from the player ­ you unplug the AC power cord of the player When you directly locate a track numbered over 20 on the player (or over 10 on the remote) Press >20 ( or >10) first, then the corresponding number buttons. To enter "0, " use button 10 (or 10/0). Example: To play track number 30 Press >20 (or >10) first, then 3 and 10 (or 10/0 ). A disc is divided into sections of a picture or a music piece called "tracks. " Each track is assigned with a track number to locate the track you want. During PBC Playback, the = and + buttons have different functions from the ones explained above. [. . . ] Remove the disc and leave the player turned on for about an hour (see page 2). /Replace all the batteries in the remote with new ones if they are weak. The player doesn't play from the first track when playing a VIDEO CD without PBC functions or an audio CD. /Press PLAY MODE repeatedly until "CONTINUE" appears in the front panel display, then press · Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car. [. . . ]