User manual SONY MDR-DS5100

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. WARNING You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. For the customers in the USA Owner's Record The model number is located on the back of the processor and on the headphone housing. The serial number is located at the bottom of the processor and the inner side of the battery compartment. [. . . ] Even AC power adapters having the same voltage and plug polarity can break the product due to the current capacity or other factors. As shown in the illustration below, insert two fully-charged (page 10) rechargeable Ni-Cd batteries with the ` and ' ends in the correction direction. When using optional batteries You can also use R6 (size AA) dry-cell batteries, Sony R6 (size AA) rechargeable NiCd batteries (NC-AA, NC-AAS), and R6 (size AA) rechargeable nickel-hydrium batteries (NH-AA) with the headphones. Usage times and charging times for Sony rechargeable batteries (sold separately) * Time to fully charge the battery when it is completely drained. When charging R03 (size AAA) batteries The supplied battery charger can also charge Sony R03 (size AAA) Ni-Cd batteries (NC-AAA) and R03 (size AAA) nickel-hydrium batteries (NH-AAA). When charging R03 (size AAA) batteries, push down the adjuster on the battery charger. * Time to fully charge the battery when it is completely drained. Never attempt to charge other types of rechargeable batteries or dry-cell batteries. The Ni-Cd batteries should be replaced with new ones when they last only half the expected time when fully charged. purchase either Sony R6 (size AA) Ni-Cd batteries (NC-AA , NC-AAS) or Sony R6 (size AA) nickel-hydrium batteries (NH-AA). You can order the batteries from the store where you made the purchase or at your nearest Sony dealer. Some battery types may not be available in certain areas. Before starting operation, be sure to read "Connecting the Headphone System" and make the proper connections. DVD player or other audio and video component POWER The POWER indicator lights red, and the headphones automatically turn on. Note To listen to dual audio (MAIN/SUB) sound sources, connect to the LINE INPUT jacks, and then select the sound source you want to listen to on the player, TV, or other component. VIRTUAL FRONT Virtual effect where the sound seems to be coming from two speakers (right and left) located in front of you. VIRTUAL SURROUND Virtual surround effect where the sound seems to be coming from not only two front speakers (right and left), but also from one center speaker, two rear speakers (right and left), and a subwoofer (when DOLBY DIGITAL and DTS are lit). When DOLBY SURROUND indicator is on: Audio recorded in Dolby Surround (Pro Logic) format is being processed. Sound field and suitable sound source Mode which reproduces the sound field of a movie theater. This mode is suitable for movie sound sources. Mode which reproduces the sound field of a listening room with good acoustic environment. This mode is suitable for music sources. [. . . ] / The audio for the chapter being played is not a multichannel signal. DTS indicator light does not turn on Refer to the instruction manual supplied with the DVD player, and set the DTS digital output setting to ON. / You are trying to play DVD software that is not compatible with DTS format. / The audio for the chapter that you are playing back is not DTS. [. . . ]