User manual SONY MDR-E819V

[. . . ] Any outdoor use of this product is prohibited on the French territory (including French overseas departments). Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ] *2 Connection to the optical digital output jack on your personal computer is not guaranteed to work with this system. (For more details, see the instruction manual of your DVD device. ) · When playing CDs recorded in DTS format, noise may occur when fast forwarding or rewinding. If the DTS digital output is set to "OFF" on the DVD device, no sound may be heard even if the DTS output is selected in the DVD menu. No sound may be heard when a DVD device and this unit is analogue-connected. Connecting cables (sold separately) Use the optical digital connecting cable POC-15AB (mini-plug y rectangular plug) when connecting the optical digital output mini-jack on portable DVD players, portable CD players, or other digital components to the DIGITAL IN jack. Be sure that the ends of the optical digital connecting cable are kept clean. Dust at the ends of the cable can degrade performance. When storing the system, attach the cap to the end of the plug and be careful not to fold or bend the optical digital connecting cable with a bend radius less than 25 mm (1 inch). The bend radius of the optical digital connecting cable should be no less than 25 mm (1 inch). Use an audio cord (sold separately) to connect the audio output jacks on a VCR, TV, or other component to the LINE IN (L/R) jacks on the processor. (If the sound field is set to "OFF, " it is not processed by DOLBY PRO LOGIC II. Note If the equipment connected to the DIGITAL IN jack is not playing back (fast forwarding, rewinding, etc. Easy to hear level Difficult to hear level When watching films, be careful not to raise the volume too high in quiet scenes. You may hurt your ears when a loud scene is played. You may hear some noise when you disconnect the AC power adaptor from the processor before removing the headphones. Transition time between modes When sliding switches on the processor to change to new modes, the transition time between modes may vary. This is due to differences in system control between modes. The headphones automatically turn off when they are removed -- Auto Power On/Off function Do not pull up the self-adjusting band when not in use, as this will consume the battery power. If a beep sound is heard from the headphones A repeated beep sound is heard if reception conditions deteriorate when the headphones are outside the signal transmission area, or another wireless apparatus using 2. 4 GHz frequency or microwave oven causes interference. If the beep sound does not stop after moving closer to the processor, let the processor detect the optimum frequency for transmission again following the procedure below. [. . . ] Bilingual sound cannot be selected when using digital input. (Both MAIN and SUB can be heard at the same time. , Connect the analogue out to the LINE IN jacks, and select the sound on the connected component. , The headphones cannot receive the signal from the processor. [. . . ]