User manual SONY MDR-EX10LP

[. . . ] Tip If the earbud slips and cannot be detached, wrap it in a dry soft cloth. -) Push the parts inside of the earbud into the headphone until the projecting part of the headphone is fully covered. [. . . ] The effect can be minimized by wearing clothes made from natural materials. Optional replacement earbuds can be ordered from your nearest Sony dealer. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minatoku Tokyo, 108-0075 Japan. the Authorized Representative for EMC and product safety is Sony Deutschland GmbH , Hedelfinger Strasse 61 , 70327 Stuttgart , Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. [. . . ] To check the black earbud sizes The black earbud sizes are distinguished by the inside colour (see fig. -) While holding the headphone, twist and pull the earbud off. [. . . ]