User manual SONY MDR-IF4000 annexe 1

[. . . ] (See "Preset Tuning") Road safety Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your headphones at high volume while walking, especially at pedestrian crossings. [. . . ] Preventing hearing damage Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. caring for others Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to people around you. Scanning will start and when a station is received, scanning will stop and the station can be heard. Install two R03 (size AAA) batteries (not supplied) with correct polarity. If the desired station cannot be received, tune in the station by pressing SCAN TUNE/TIME SET + or ­ repeatedly. If there is lightning when you are using the unit, take off the headphones immediately. The front panel buttons do not operate at all. The unit is being used in extremely high or low temperatures or in a place with excessive moisture. Very weak or interrupted sound, or unsatisfactory reception. In a vehicle or in a building, listen near a window. The station cannot be received when a preset tuning button is pressed. Sound is not heard and " the display. While holding down ENTER/CLOCK, press SCAN TUNE/TIME SET + or ­ to set the clock to the current time. Each time you press the button, the digits move forward or back by one. when you keep the button pressed , the digits change rapidly. [. . . ] when you keep the button pressed , the digits change rapidly. When you release ENTER/CLOCK, the clock starts operating, and ":" starts flashing. The MEGA BASS function can only be used when i/5 selector is switched to i . [. . . ]