User manual SONY MDR-NWBT10

[. . . ] You can also charge the Bluetooth headphones using an AC power adaptor (not supplied). 2 Connect the Bluetooth headphones and your computer using the Micro USB cable (supplied). While the Bluetooth headphones are being charged, the indicator (red) lights up. When charging is completed, the indicator turn off automatically. [. . . ] By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. the recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. to ensure that the battery will be treated properly , hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. To enter pairing mode Press and hold the /POWER button for more than 7 seconds* while the Bluetooth headphones are turned off. the indicator flashes blue and red alternatively and the Bluetooth headphones enters pairing mode. * After purchasing the Bluetooth headphones, when pairing for the first time, press and hold the /POWER button for about 2 seconds while the Bluetooth headphones are turned off. If pairing is not established within about 5 minutes, pairing mode will be cancelled and the Bluetooth headphones will turn themselves off. IBM PC/AT compatible computer with pre-installed with any of the following operating systems and USB port: Windows XP Professional (Service Pack 3 or later)/Windows Vista Home Basic (Service Pack 1 or later)/Windows Vista Home Premium (Service Pack 1 or later)/Windows Vista Business (Service Pack 1 or later)/Windows Vista Ultimate (Service Pack 1 or later)/Windows 7 Starter/Windows 7 Home Basic/Windows 7 Home Premium/Windows 7 Professional/Windows 7 Ultimate Design and specifications are subject to change without notice. Other trademarks and trade names are those of their respective owners. "WALKMAN" and "WALKMAN" logo are registered trademarks of Sony Corporation. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, TM and ® marks are not specified. When the screen to select a connection target appears, select "MDR-NWBT10. " When the screen to enter the passkey appears, enter "0000". When pairing is established, depending on the Bluetooth device, Bluetooth connection may start automatically. note If pairing with multiple Bluetooth devices, repeat the steps from step 1 for each pairing. Sony Wireless Stereo Headphones MDR-NWBT10 (thereafter Bluetooth headphones in this manual) using Bluetooth wireless technology. [. . . ] If the earbuds are damaged, replace with new earbuds. Find the beginning of the previous or current song/ find the beginning of the next song Fast rewind/fast forward Turn up/down the volume Turn up/down the volume continuously Bluetooth wireless technology operates within a range of about 10 metres. Maximum communication range may vary depending on obstacles (human body, metal, wall, etc. If the Bluetooth headphones do not function as expected, press the RESET button with a small pin, etc. [. . . ]