Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY MDR-RF875RK. We hope that this SONY MDR-RF875RK user guide will be useful to you.
Lastmanuals help download the user guide SONY MDR-RF875RK.
Detailed instructions for use are in the User's Guide.
[. . . ] Noise or interfering signals exist in the surroundings due to radio transceivers in trucks, etc. ⷠNoise or interfering signals exist in the surroundings owing to wireless communication systems installed along roadways. Check that you have the following items: · If you connect the transmitter to LINE OUT or REC OUT jack of an audio reproducer such as an MD player or CD player, do not set the NOISE FILTER switch to ON. [. . . ] You may not hear the beginning of the sound from the headphones until the transmitter starts sending the RF signals after detecting an audio signal. Auto power on/off function When you remove the headphones from your head, the power turns off automatically. Do not allow the self adjusting band to be pulled up, otherwise the headphones will be switched on. Try the above steps 3 and 5 until the receiving performance becomes better. Note If a hissing noise is heard move closer to the transmitter. The optimum distance is up to approximately 100 m without the system picking up some interference. However, the distance may vary according to the surroundings and environment. If the system picks up noise, reduce the distance between the transmitter unit and the headphones, or select the other channel. notes · When you use the headphones inside the effective areas of the transmitter, the transmitter can be placed in any direction from the listener. ⷠEven within the signal reception area, there are some spots (dead spot) where the RF signal can not be received. This characteristics is inherent to RF signals, and does not indicate malfunction. By slightly moving the transmitter, location of the dead spot can be changed. When the ear pads become dirty or damaged, you can get replacements from your Sony dealer. Remove the old ear pad by pulling it out of the groove on the housing. Place the new ear pad on the driver unit and insert the edge of the pad into the groove as illustrated. Make sure that the entire edge of the ear pad is securely inserted into the groove. [. . . ] If you connect the transmitter to LINE OUT or REC OUT jack of an audio reproducer, make sure that the NOISE FILTER switch is set to OFF. Loud background noise As you move away from the transmitter, more noise is likely to be heard. if the transmitter is connected to a headphone jack , turn up the volume of the connected audio/video equipment. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY MDR-RF875RK
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY MDR-RF875RK will begin.
