User manual SONY MDR-XB40EX

[. . . ] Direct Vibe Structure Tightly sealed acoustic design for a high level of sound isolation and booming bass sound · wide 13. 5mm driver units reproduce powerful and dynamic deep bass sound · Closed type vertical in-the-ear headphones for good wearing comfort · How to use Determine right and left headphone and hold them as in the illustration. [. . . ] Remove the earbuds from the headphones, and wash them with a mild detergent solution. Hold the clip closed, and pull up the lever on the clip just a little. Put the cord into the groove under the lever. If you pull up the lever on the clip without holding the clip closed, or holding the clip closed but opening the lever too much, you cannot put the cord into the groove under the lever. Do not catch the cord on the projection of the clip or do not wedge it into the groove. Do not move the clip position with the cord attached. 32 oz) without cord / Supplied accessories: Earbuds (S × 2, M × 2, L × 2), Carrying case (1), Clip (1) * IEC = International Electrotechnical Commission Design and specifications are subject to change without notice. Because the headphones are of a high density enclosure, forcing them against your ears may result in eardrum damage. Avoid using the headphones where they are liable to be struck by people or other objects, such as a ball, etc. Pressing the headphones against your ears may produce a diaphragm click sound. [. . . ] the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. [. . . ]