User manual SONY MDS-B5

[. . . ] The model and serial numbers are located on the top of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] The rehearsal playback starts from where you pressed the button. adjust the dividing position using = or + key. Pressing the 0/) button allows you to change the unit for shifting the top position of the rehearsal playback. You can choose the unit from "F" (frame), "S" (second), or "M" (minute). " appears and the deck starts to play back the divided track for confirmation. Turn the AMS control to select the track to be divided. Locating the dividing position with the rehearsal playback before using the divide function allows you to skip the procedures for selecting the track to be divided and locating the dividing position. Turn the AMS control until "005:Divide ?" appears and the deck starts to play back the divided track for confirmation. If "Impossible" indication appears, you can not divide the track you specified. Repeating the division of tracks may produce a track which cannot be divided. This is the restriction on the MiniDisc system and is not out of order. â· The original title for the divided track goes with the former part of it. The two tracks to be combined needs not to be consecutive. And the latter track to be combined can be the track which comes before the former one in track number order. The display changes for selecting the latter track to be combined and the rehearsal playback of the currently displayed track starts. " appears and the deck starts to play back the combined track for confirmation. Press the EDIT/NO button while the MD deck is stopped, playing back, or in playback pause. Turn the AMS control until "004:Combine ?The display changes for selecting the former track to be combined and the rehearsal playback of the currently displayed track starts. When you play back the former track to be combined, you can use the remote controller or the keyboard to combine tracks. " appears and the deck starts to play back the combined track for confirmation. [. . . ] Command: 072H Function : The deck outputs this information to indicate that the it is in illegal status (an illegal command is received). Command: 074H Function : The deck notifies that its power has been turned on. If this information is output, the controller should issue various SENSE commands such as 00FH, 050H, 055H, 078H and 079H to sense the deck, software version and other information that are not checked periodically. Command: 076H Function : The deck notifies that the mode has changed as indicated with DATA1. [. . . ]