User manual SONY MDS-JB930

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Before operating the deck, please read this manual thoroughly and retain it for future reference. The instructions in this manual are for the MDS-JB930 MiniDisc Deck. The following caution label is located inside the unit. [. . . ] YES button: Press this button instead of the AMS contr to enter a selection. M/M buttons: Press to specify the unit (minute, second, or frame) by which the MD is advanced when the AMS control is tur ned. Y ou can also use these buttons to locate the end point of the portion to be erased. For further details on the function of each button and control, see the sections on editing operations. About indication which appears while editing You can erase a track or par t of a track simply by specifying the number of the track or the portion within a track to be erased. About indications which appear after editing When "TOC" lights up in the display Editing has finished but the TOC (T able of Contents) on the MD has not been updated to r eflect the editing r esults. The editing will be lost if you disconnect the mains lead while the indication is on. The TOC will be updated only when you eject the MD or tur n of f the MD deck. when "TOC Writing" flashes in the display The deck is updating the TOC. Do not disconnect the mains lead or move the deck while the indication flashes. Specify the number of the track you want to erase. When you erase a track, all the tracks after the one erased are automatically r enumber ed. For example, if you erase track number 2, the pr evious track number 3 becomes track number 2 and the pr evious track number 4 becomes track number 3, and so on. While the deck is stopped, playing, or paused, press MENU/NO. The deck starts to play the track indicated by the number in the display . /> repeatedly) until the track number you want to erase appears. " appears for a few seconds and the track is erased. The track following the erased track starts to play. If the erased track is the last one on the MD, the track pr eceding the erased track star ts to play . " appears in step 4 above The track has been record-protected on another MD deck. If you still want to erase the track, press AMS or YES again while the indication appears. You can easily erase a por tion of a track by specifying the starting and ending points of the erasur e. [. . . ] An attempt was made to make a second copy from a digitally dubbed MD (page 17). An attempt was made to edit the MD during Programme or Shuffle Play. Or the contents recorded by timer have disappeared over time and are not be available for saving to disc, or Programme Play could not be activated since the programme has disappeared over time. (The message flashes for about four seconds when you turn on the deck by pressing +/1. [. . . ]