User manual SONY MDS-JE700

[. . . ] The following icons are used in this manual: ZIndicates a procedure that requires use of the remote. The following caution label is located inside the unit. This chapter provides information on the supplied accessories, things you should keep in mind while hooking up the system, and how to connect various audio components to the MD deck. Be sure to read this chapter thoroughly before you actually connect anything to the deck. [. . . ] Pausing after each track (Auto Pause) You can set the MD deck so that it pauses after each track to give you time to locate the next track to be recorded. Inserting blanks between tracks during play (Auto Space) The MD deck can be set to automatically insert a threesecond blank between tracks during play. This function is useful when you're recording from an MD to an analog tape since the three-second blank enables you to use the Multi-AMS function later to locate the beginning of tracks on the tape. While the deck is stopped, press MENU/NO twice. /> repeatedly) until "Auto Off" appears, then press AMS or YES. Turn on Auto Pause Turn off Auto Pause While the deck is stopped, press MENU/NO twice. /> repeatedly) until "Auto Off" appears, then press AMS or YES. Turn on Auto Space Turn off Auto Space If you turn off the deck or disconnect the mains lead, the deck will store the last setting ("Auto Pause" or "Auto Off") and recall it the next time you turn on the deck. If you select "Auto Space" and record a selection containing multiple track numbers (for example, a medley or symphony), blank spaces will be created on the tape in between the various sections. â· If you turn off the deck or disconnect the mains lead, the deck will store the last setting ("Auto Space" or "Auto Off") and recall it the next time you turn on the deck. This chapter explains how to edit the tracks that have been recorded on an MD. " appears for a few seconds and the track is erased. The track following the erased track starts to play. If the erased track is the last one on the MD, the track preceding the erased track starts to play. " appears in step 4 above The track has been record-protected on another MD deck. If you still want to erase the track, press AMS or YES again while the indication appears. You can easily erase a portion of a track by specifying the starting and ending points of the erasure. This is useful for erasing the unnecessary portions of a track recorded from a satellite or FM broadcast. Z To avoid confusion when erasing more than one track start erasing from the highest numbered track. This way you'll avoid renumbering the tracks that you plan to erase. Do the procedure below to erase all the tracks, track names, and disc name at once. While the deck is stopped, playing, or paused, press MENU/NO. [. . . ] Design and specifications are subject to change without notice. An attempt was made to make a second copy from a digitally dubbed MD (page 15). An attempt was made to edit the MD during Programme or Shuffle Play. Or the contents recorded by timer have disappeared over time and are not be available for saving to disc, or Programme Play could not be activated since the programme has disappeared over time. [. . . ]