User manual SONY MDS-JE780

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] The total number of tracks increases by one and all the tracks following the divided ones are renumbered. Example: Dividing track 2 into two tracks. Dividing a track after selecting the track 1 While the deck is stopped, playing, or Repeatedly) until the number of the track you want to divide appears. Divide track 2 into track B and C 4 "-Rehearsal-" appears in the display and the deck repeatedly plays a few seconds of the track from the point AMS or YES was pressed. " appears and the deck starts to play the newly created track. /> repeatedly) while monitoring the sound, and then press AMS or YES when you locate the desired point. you can shift the point by 1-frame1) intervals (1 frame = 1/86 second). 1) You can shift the point by 2-frame intervals on the track recorded in Monaural mode or LP2 Stereo mode, and by 4-frame intervals on the track recorded in LP4 Stereo mode. In step 5, if you want to shift the dividing point by a certain number of seconds or minutes, press m/ M repeatedly. You can change the unit by which the counter advances when you turn AMS (or press . For details, see "Marking track numbers while recording" on page 14. You can use this function to combine 2 tracks into a single track. The total number of tracks decreases by one and all tracks following the combined ones are renumbered. You can also use this function to erase unnecessary track numbers. 1 While the deck is stopped, playing, or Repeatedly) until the number of the first track of the two to be combined appears, then press AMS or YES. The display for selecting a second track appears and the deck plays the portion where joining will occur (the end of the first track and the beginning of the second track following it) repeatedly. Repeatedly) until the number of the second track of the two to be combined appears, then press AMS or YES. " appears and the deck starts to play the combined track. When you combine two tracks that are registered into different groups, the second track is reregistered into the group containing the first track. In addition, if you combine a track that is registered to a group with a track that is not registered to a group, the second track takes the same registration setting as the first track. However, when the Group function is on, you can only combine tracks within the selected group. Tracks recorded in different modes (stereo, MONO, LP2 or LP4) cannot be combined. [. . . ] An attempt was made to create a new group in excess of the maximum number of groups, or there are insufficient characters for updating the group management information. F Edit (changing the recording level after recording, Fade-in, Fade-out) operation was not performed properly because the deck was moved while recording was in progress or the MD is damaged or dirty. You pressed an invalid key during MD operation. Or the contents recorded by the timer have disappeared over time and are not be available for saving to disc, or Programme Play could not be activated since the programme has disappeared over time. [. . . ]