User manual SONY MDS-LSA1

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Before operating the deck, please read this manual thoroughly and retain it for future reference. Controls in these instructions are those on the deck; these may, however, be substituted by controls on the supplied remote that are similarly named, or, when different, appear in the instructions within parentheses. The following icons are used in this manual: ZIndicates a procedure that requires use of the remote. [. . . ] About indication which appears while editing Specify the number of the track you want to erase. About indications which appear after editing When "TOC" lights up in the display Editing has finished but the TOC (Table of Contents) on the MD has not been updated to reflect the editing results. The editing will be lost if you disconnect the mains lead while the indication is on. The TOC will be updated only when you eject the MD or turn off the MD deck. when "TOC Writing" flashes in the display The deck is updating the TOC. Do not disconnect the mains lead or move the deck while the indication flashes. When you erase a track, all the tracks after the kne erased are automatically renumbered. For example, if you erase track number 2, the previous track number 3 becomes track number 2 and the previous track number 4 becomes track number 3, and so on. While the deck is stopped, playing, or paused, press MENU/NO. The deck starts to play the track indicated by the number in the display. /> repeatedly until the track number you want to erase appears. " appears for a few seconds and the track is erased. The track following the erased track starts to play. If the erased track is the last one on the MD, the track preceding the erased track starts to play. " appears in step 4 above The track has been record-protected on another MD deck. If you still want to erase the track, press YES again while the indication appears. Z To avoid confusion when erasing more than one track start erasing from the highest numbered track. This way you'll avoid renumbering the tracks that you plan to erase. Do the procedure below to erase all the tracks, track names, and disc name at once. While the deck is stopped, playing, or paused, press MENU/NO. " appears for a few seconds and all the tracks, track names, and disc name are erased. /> repeatedly to locate the starting point of the portion to be erased (point A). [. . . ] The deck's self-diagnosis function automatically checks the condition of the MD deck when an error occurs, then issues a code and an error message on the display. If the code and message alternate, find them in the following table and perform the indicated countermeasure. Should the problem persist, consult your nearest Sony dealer. , Take out the MD and close the record-protect slot (page 13). [. . . ]