User manual SONY MDS-PC1

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The use of optical instruments with this product will increase eye hazard. [. . . ] For such tracks, it is better to play the MD at normal speed. You can play tracks repeatedly in any play mode. You can play a specific portion of a track repeatedly. This might be useful when you want to memorize lyrics. Note that you can only repeat a portion within the boundaries of a single track. While playing a disc, press A~B at the starting point (point A) of the portion to be played repeatedly. "REPEAT" appears and "A-B" flashes in the display. Continue playing the track or press ) until you reach the ending point (point B), then press A~B again. "REPEAT A-B" lights continuously. The deck starts to play the specified portion repeatedly. You can repeat the portion immediately after the currently specified portion by changing the starting and ending points. 1 Press A~B while "REPEAT A-B" appears. The current ending point B becomes the new starting point A, "REPEAT" lights continuously, and "A-B" flashes in the display. 2 Continue playing the track or press ) until you reach the new ending point (point B), then press A~B again. "REPEAT A-B" lights continuously and the deck starts playing repeatedly the newly specified portion. note If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting of the Repeat Function the next time you turn on the deck. The A-B Repeat settings, however, are lost. Press REPEAT several times until "Repeat off" appears. While the track you want to repeat is playing in normal play, press REPEAT several times until "Repeat 1" appears in the display. You can have the deck "shuffle" tracks and play them in random order. You can specify the playback order of the tracks on an MD and create your own programs containing up to 25 tracks. Press PLAY MODE repeatedly (or SHUFFLE once) until "SHUFFLE" appears in the display when the deck is stopped. [. . . ] US and foreign patents licensed from Dolby Laboratories Licensing Corporation. Design and specifications are subject to change without notice. This MD deck uses the Serial Copy Management System, which allows only first-generation digital copies to be made of premastered software via the deck's digital input jack. an outline of this system appears below: 1 You can record from digital program sources (CDs, DATs or premastered MDs) onto a DAT tape or recordable MD via digital input jack on the DAT or MD deck. [. . . ]