User manual SONY MDS-S38

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The deck starts to play the specified portion repeatedly. You can repeat the portion immediately after the currently specified portion by changing the starting and ending points. 2 Continue playing the track or press ) until you reach the new ending point (point B), then press A~B again. "REPEAT A-B" lights continuously and the deck starts playing repeatedly the newly specified portion. Press REPEAT several times until "REPEAT" disappears. While the track you want to repeat is playing in normal play, press REPEAT several times until "REPEAT 1" appears in the display. note If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting of the Repeat Function the next time you turn on the deck. The A-B Repeat settings, however, are lost. You can have the deck "shuffle" tracks and play them in random order. You can specify the playback order of the tracks on an MD and create your own programs containing up to 25 tracks. Press PLAY MODE repeatedly (or SHUFFLE once) until "SHUFFLE" appears in the display when the deck is stopped. Press PLAY MODE repeatedly (or PROGRAM once) until "PROGRAM" appears in the display when the deck is stopped. Do either a) or b): a) When using the remote Press the number buttons to enter the tracks you want to program in the order you want. To program a track with a number over 25, use the >25 button (see page 19). If you've made a mistake Press PLAY MODE repeatedly (or CONTINUE once) until "SHUFFLE" disappears when the deck is stopped. You can specify tracks during Shuffle Play To play the next track, turn AMS clockwise (or press +). To play from the beginning of the current track again, turn AMS counterclockwise (or press =). You cannot use AMS (or =) to go to tracks that have already been played. B) When using the controls on the deck 1 Turn AMS until the track number you want appears in the display. Each time you enter a track, the total program time is added up and appears in the display. Press PLAY MODE repeatedly (or CONTINUE once) until "PROGRAM" disappears when the deck is stopped. Useful Tips when Recording from MDs to Tape Z The Auto Space and Auto Pause Functions described in this section make recording from MDs to tape more easy. [. . . ] /The currently selected CD player type (CD player or Video CD player) does not match the CD player being used. reset the CD player type (see page 15). If you use a CD player with a mode selector, set the mode selector to CD1. If you experience any of the following difficulties while using the deck, use this troubleshooting guide to help you remedy the problem. [. . . ]