User manual SONY MDS-S50

[. . . ] The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] The time indication (minute, second, and frame) of the current point is displayed and the deck plays several seconds of the track to that point repeatedly. 1) When recording in Stereo mode, you can shift the starting point by 2-frame intervals (in Monaural mode and LP2 Stereo mode) or by 4-frame intervals (in LP4 Stereo mode). You can use this function to mark track numbers after recording. The total number of tracks increases by one and all the tracks following the divided ones are renumbered. Example: Dividing track 2 into two tracks. Track number Original tracks Divide track 2 into track B and C After DIVIDE Specify a unit (minute, second, or frame) by which the MD is advanced when you turn AMS (or press . To do this, press m/M in step 4 repeatedly to select minute, second, or frame. 5 Repeat step 4 until you have located Dividing a track after selecting the track "Point B set" appears and the deck starts playing from point A until the track ends. 1 While the deck is stopped, playing, or 7 Continue playing the track or press M Repeatedly) until the number of the track you want to divide appears, then press AMS or YES. " alternate in the display and a few seconds of the track before point A and after point B play back repeatedly. "-Rehearsal-" appears and the deck repeatedly plays several seconds of the track from the point AMS or YES was pressed. " appears for a few seconds and the track is divided. The deck starts to play the newly created track. 4 While monitoring the sound, turn AMS You can shift the starting point by 1-frame1) intervals (1 frame = 1/86 second). The time indication (minute, second, and frame) of the current point is displayed and the deck plays several seconds of the track to that point repeatedly. 1) When recording in Stereo mode, you can shift the starting point by 2-frame intervals (in Monaural mode and LP2 Stereo mode) or by 4-frame intervals (in LP4 Stereo mode). You can use this function to combine 2 tracks into a single track. The total number of tracks decreases by one and all tracks following the combined ones are renumbered. You can also use this function to erase unnecessary track numbers. Specify a unit (minute, second, or frame) by which the MD is advanced when you turn AMS (or press . To do this, press m/M in step 4 repeatedly to select minute, second, or frame. 5 Repeat step 4 until you have located the " appears and the deck starts to play the newly created track. [. . . ] You attempted to perform another operation while in S. f Edit (changing the recording level after recording , Fade-in , Fade-out) mode. You cannot perform any other operations while in S. 6 µW1) 1) This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. [. . . ]