User manual SONY MDS-SD1

[. . . ] You can easily record a CD onto an MD (see pages 12 and 15). US and foreign patents licensed from Dolby Laboratories. You can switch from another source to the MD deck and start playing an MD just by pressing H on the MD deck (see page 6). You can wake up to music or record a radio programme at a preset time. [. . . ] Once adjusted, the recording level is maintained until you adjust it again. If you adjust the recording level during recording such as part-way through a track, the recorded volume changes at the point where the adjustment was performed. ⷠIf "OVER" appears in the display when the recording level is between ­12 and 0, change the audio input level and reduce the input sound. Turn l/L until "Level Adjust" appears, then press ENTER/YES. turn l/L to adjust the recording level. The sound source and recording level are displayed. The recording level can be adjusted from ­12 to +12. While monitoring the sound, adjust to the optimum level while making sure that "OVER" does not appear in the display at the loudest portion. Adjust the level so that "OVER" does not appear When recording in monaural format, the MD recording time is approximately twice the normal recording (stereo recording) time (i. , stereo sound when recording a stereo broadcast) from the speakers. 2 Turn l/L until "MD Mono Rec" appears, then press ENTER/YES. Before pulling out the mains lead Do not pull out the mains lead before updating the TOC (while "TOC" is lit) or while updating the TOC (while "TOC" is flashing) to ensure a complete editing. You can create titles for your recorded MDs and tracks as follows. Or > until the desired track number appears. If "CD-TEXT" flashes in the display during recording a CD, you can record the CD disc title on the MD (see page 16). You can input a total of approximately 1700 characters for the disc title and track titles on a single MD. Each time you press the button, the display changes as follows: A (Upper cases) t a (Lower cases) t 0 (Numbers) t !To enter a blank space Go to step 5 without pressing . You cannot enter a space as the first character. The character you selected in step 4 stops flashing and the cursor shifts to the right. To erase the disc titles and all track titles at once " appears, and the disc title and all track titles are erased. Repeat steps 3 to 5 to complete the entire title. [. . . ] ⷠPress PLAY MODE repeatedly while the MD deck is in stop mode until "PROGRAM" or "SHUFFLE" disappears to return to normal play. Keep pressing m on the MD deck or turn l/L on the MD deck counterclockwise to return to the desired playing position. "OVER" lights up during recording. Recording or editing was done, but the TOC is not updated. [. . . ]