User manual SONY MDS-W1

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Should any solid object or liquid fall into the cabinet, unplug the deck and have it checked by qualified personnel before operating it any further. Before operating the deck, please read this manual thoroughly and retain it for future reference. Before operating the deck, check that the operating voltage of the deck is identical with your local power supply. [. . . ] The deck starts to play the specified portion repeatedly. You can repeat the portion immediately after the currently specified portion by changing the starting and ending points. 1 Press A~B while "a~b" appears. The current ending point b becomes the new starting point a, "an" lights continuously, and "b" flashes in the display. 2 Continue playing the track or press ) until you reach the new ending point (point b), then press A~B again. "a~b" lights continuously and the deck starts playing repeatedly the newly specified portion. You can have the deck "shuffle" tracks and play them in random order. You can also use the controls on the deck to set the Shuffle Play mode 1 2 3 4 Press MENU/NO twice to display SET UP menu. Turn AMS to select "PLAY MODE", then press AMS. Turn AMS to select "SHUFFLE", then press AMS. Press CONTINUE when the deck is stopped so that "SHUF" disappears. You can specify tracks during Shuffle Play To play the next track, press + (or turn AMS clockwise). To play from the beginning of the current track again, press = (or turn AMS counterclockwise). You cannot use = (or AMS) to go to tracks that have already been played. You can specify the playback order of the tracks on an MD and create your own programs containing up to 25 tracks. You cannot create a program containing tracks from both deck A and deck B. Press the number buttons to enter the tracks you want to program in the order you want. To program a track with a number over 25, use the >25 button (see page 25). If you enter the wrong track number Press 0 or ) until the wrong track number flashes, then enter the correct track number with the number buttons. The entered track is added to the location where the " " (cursor) flashes. Each time you enter a track, the total program time is added up and appears in the display. While the deck is stopped, press MENU/NO twice to display SET UP menu. [. . . ] Design and specifications are subject to change without notice. This MD deck uses the Serial Copy Management System, which allows only first-generation digital copies to be made of premastered software via the deck's digital input jack. an outline of this system appears below: 1 You can record from digital program sources (CDs, DATs or premastered MDs) onto a DAT tape or recordable MD via digital input jack on the DAT or MD deck. You cannot, however, record from this recorded DAT tape or MD onto another DAT tape or recordable MD via the digital input jack on the DAT or MD deck. [. . . ]