User manual SONY MDS-E3

[. . . ] To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as bookcase or built in cabinet. [. . . ] ) other than "Moving recorded tracks" (page 21) and "Naming a track or an MD" (page 21) using the deck. Press CLEAR repeatedly until all the track numbers disappear. Before disconnecting the AC power cord Press PLAY MODE repeatedly until "PGM" turns off. The programme remains even after Programme Play ends or is stopped The display shows "- - - m - - s" when the total playing time of the programme exceeds 1, 000 minutes. Do not disconnect the AC power cord before updating the TOC (while "TOC" is lit) or while updating the TOC (while "TOC Writing" is flashing) to ensure a complete editing. The MD deck lets you erase unwanted tracks quickly and easily. Do the procedure below to erase all the tracks, track names, and disc name at once. 1 While the deck is stopped, playing, or You can erase a track simply by selecting its track number. When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered. Track number 1 Original tracks Erase track 2 You can specify a portion within a track and erase the portion with ease. You can shift the desired portion by frame1), minute or second intervals. " appears and the deck starts to play the newly created track. If the dividing point is not correct, adjust the point by turning AMS (or press . /> repeatedly) while monitoring the sound, and then press PUSH ENTER or YES when you locate the desired dividing point. you can shift the point by 1frame1) intervals (1 frame = 1/86 second). 1) You can shift the point by 2-frame intervals on the track recorded in Monaural mode or LP2 Stereo mode, and by 4-frame intervals on the track recorded in LP4 Stereo mode. 1 While the deck is stopped, playing, or Repeatedly) until the number of the first track of the two tracks to be combined appears, then press PUSH ENTER or YES. In step 5, if you want to shift the dividing point by a certain number of seconds or minutes, press m/M repeatedly. You can change the unit by which the counter advances when you turn AMS (or press . You can use this function to combine 2 tracks into a single track. The total number of tracks decreases by one and all tracks following the combined ones are renumbered. You can also use this function to erase unnecessary track numbers. [. . . ] There is not enough time left on the MD. Replace it with another recordable MD with fewer recorded tracks, or erase unnecessary tracks (page 18). There has been a power failure or the AC power cord has been disconnected during recording. The deck does not perform Synchro-recording with a CD player or video CD player. [. . . ]