User manual SONY MDS-JE320

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ⭠Increase the separation between the equipment and receiver. [. . . ] Since erasing merely updates the TOC, there is no need to record over material. To avoid confusion when erasing multiple tracks, you should proceed in order of high to low track number to prevent the renumbering of tracks that have not been erased yet. The deck could not edit because the record-protect slot on the MD is open. Turn AMS until the track number you want to erase appears in the display. The track number you selected starts flashing in the music calendar. When the track selected in Step 1 has been erased, "Complete" appears for a few seconds and the total number of tracks in the music calendar decreases by one. If you erase a track during playback, the track following the deleted track begins playing afterwards. Repeat Steps 1 to 3 to erase more tracks. Do not move the deck or pull out the AC power cord. After editing, "TOC" lights continuously until you eject the MD or turn off the deck. "TOC" flashes while the deck is updating the TOC. When the deck finishes updating the TOC, "TOC" goes off. Press EDIT/NO, p, or turn AMS to change the track number. " appears in the display, the track was recorded or edited on another MD deck and is record-protected. You can specify a portion within a track and erase the portion with ease. It is convenient when erasing unnecessary sections after recording satellite broadcast or FM broadcast. Example: Erasing a part of track A Point A Track number Erasing 1 2 A (#1+#3) B 3 C 1 A #1 A #2 A #3 Point B 2 B 3 C While the deck is stopped, press EDIT/NO repeatedly until "All Erase ?When the disc name, all recorded tracks, and titles on the MD have been erased, "Complete" appears for a few seconds and the music calendar disappears. Use the Undo Function immediately after you erased the track (see page 23). While playing a disc, press P at the starting point (point A) of the portion to be erased. " in the display and the starting point A of the portion to be erased plays back repeatedly. ) While monitoring the sound, turn AMS to find point A. [. . . ] ⷠRecording over a track to eliminate noise is not recommended since this may shorten the duration of the track. ⷠYou may find it impossible to label a track while recording over it. The correct recorded/playing time may not be displayed during playback of monaural-format MDs. / Strong magnetism from a television or a similar device is interfering with operations. [. . . ]