User manual SONY MDX-40

[. . . ] Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Align part A of the front panel to part B of the unit as illustrated, and push until it clicks. Be sure not to attach the front panel upside down. â· Do not press the front panel hard against the unit when attaching it. [. . . ] Tune in any station and press (LIST) for two seconds. Repeat steps 3 and 4 if you want to erase other names. If you want to put a blank space between characters, select "_" (underbar). 3 Repeat steps 1 and 2 to enter the entire name. To return to normal radio reception, press (LIST) for two seconds. Tip To erase/correct a name, enter "_" (under-bar) for each character. Note After the station name or frequency has been displayed for five seconds, the display goes back to normal mode. You can control the optional CD or MD changer with the rotary remote. Every time you press (SOURCE), the source changes as follows: Pressing (MODE) changes the operation in the following ways: Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary remote. Rotate and hold the control until you locate the specific point in a track, then release it to start playback. If you need to mount the rotary remote on the right side of the steering column, you can reverse the controls operative direction. 2 * If you play a CD-TEXT disc, the artist name appears in the display after the disc name. (Only for CD-TEXT discs with the artist name) 3 * If the track name of a CD-TEXT disc or MD is not prerecorded, "NO T. During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point. To search forward To search backward You can label a personalized name for CDs and CD-TEXT discs with the disc memo function, refer to "Labeling a CD" (page 13). Tip If the name of the MD or CD-TEXT disc is too long, you can scroll it across the display by pressing (SCRL) while the disc name or track name is displayed. Press the number button that corresponds with the desired disc number. Playing tracks in random order -- Shuffle Play You can play the first 10 seconds of all the tracks on the currently selected disc. During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until "Intro" appears. To go back to the normal playback mode, select "Shuf off" in step 2 above. To go back to the normal playback mode, select "Intro off" in step 2 above. [. . . ] To go back to the normal playing mode, select "Bank off" in step 2 above. If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. â· If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. [. . . ]