User manual SONY MDX-C6500RX

[. . . ] This unit lets you enjoy a variety of features using the following controller accessories: Optional accessories Rotary commander RM-X4S Card remote commander RM-X91 In addition to the MD playback and radio operations, you can expand your system by connecting optional CD/MD units*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you playback a CD TEXT disc*2. If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connections first. [. . . ] The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. If an MD is not in the unit, only the tuner band appears even if you press (SOURCE). Press the number button ((1) to (6)) on which the desired station is stored. During radio reception, press (MENU), then press either side of (DISC/PRST) repeatedly until "MONO-OFF" appears. Tip Press either side of (DISC/PRST) to receive the stations in the order they are stored in the memory (Preset Search Function). To return to normal mode, select "MONO-OFF" in step 2. Press either side of (SEEK/AMS) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (MENU), then press either side of (DISC/PRST) repeatedly until "LOCAL" (local seek mode) is displayed. Only the stations with relatively strong signals will be tuned in. SEEK" appears while the unit is searching for a station. If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning). Your car stereo offers you a variety of services. Here are just a few: retuning the same programme automatically, listening to traffic announcements, and locating a station by programme type. notes · Depending on the country or region, not all of the RDS functions are available. RDS may not work properly if the signal strength is weak or if the station you are tuned to is not transmitting RDS data. Tip The Motion Display mode can be turned off. (See "Changing the sound and display settings" on page 24. ) Note "NO NAME" appears if the received station does not transmit RDS data. [. . . ] And foreign patents licensed from Dolby laboratories Licensing Corporation. Design and specifications are subject to change without notice. The following checklist will help you remedy the problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. [. . . ]