User manual SONY MDX-C670

[. . . ] This unit lets you enjoy a variety of features by using a rotary remote. In addition to the MD playback and the radio operations, you can expand your system by connecting an optional CD/MD changer. If you connect an optional CD changer with the CD-TEXT function, the CD-TEXT information will appear in the display when you play back a CD-TEXT disc*. Playing tracks in random order -- Shuffle Play . [. . . ] Rotate and hold the control until you locate the specific point in a track, then release it to start playback. If you need to mount the rotary remote on the right side of the steering column, you can reverse the controls operative direction. -- Select "Auto" to dim the display only when you turn the lights on. Contrast to adjust the contrast if the indications in the display are not recognizable because of the unit's installed position. â· Beep to turn on or off the beeps. -- Select "norm" to use the rotary remote as the factory preset position. Loud (Loudness) to enjoy bass and treble even at low volume. Press (SOUND) two seconds while pushing the VOL control. Tip You can control the operative direction of controls with the unit. Each source can store the bass and treble levels respectively. Each time you press (2) (SET UP), the item changes as follows: Scrl* n Disc MEMO/TEXT name* * When you have not turn the station or there is no CD/MD being played, these items will not appear. Adjust within three seconds after selecting the item. Tip The unit decreases the volume automatically when a telephone call comes in (Telephone-mute function). At "Contrast" setting, pressing (4) (n) makes the contrast higher, and pressing (1) (N) makes the contrast lower. When the mode setting is complete, the normal playback mode appears. You can control up to 7 CD changers and MD changers with this unit. If you connect an optional CD changer with the CD-TEXT function, the CD-TEXT information will appear in the display when you play back a CD-TEXT disc. The disc name appears when the disc has changed (if the disc name is selected). â· The track name appears when the track has changed (if the track name is selected). â· The disc or track name appears depending on the setting when you press (SOURCE) to select an MD or CDTEXT disc. If you press (DSPL) to change the display item, the disc or track name of the MD or CDTEXT disc is scrolled automatically whether you set the function on or off. When a CD or an MD changer is connected, all the tracks play from the beginning. [. . . ] The unit may not function properly if the connectors between the unit and the front panel are not clean. To prevent this, open the front panel by pressing (RELEASE), then detach it and clean the connectors with a cotton swab dipped in alcohol. Otherwise, the connectors may be damaged. Pull the unit out while the release key is inserted. [. . . ]