User manual SONY MDX-C670RDS

[. . . ] If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. If no sound comes from the speakers of the two-speaker system, set the fader control to the centre position. If your car is equipped with a power aerial, it will extend automatically while the unit is operating. [. . . ] If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning). Your car stereo offers you a variety of services. Here are just a few: returning the same programme automatically, listening to traffic announcements, and locating a station by programme type. notes · Depending on the country or region, not all of the RDS functions are available. RDS may not work properly if the signal strength is weak or if the station you are tuned to is not transmitting RDS data. Each time you press (DSPL/PTY), the item changes as follows: Station Name (Frequency) y Programme type Tip The Motion Display mode can be turned off. By using this function, you can continuously listen to the same programme during a longdistance drive without having to retune the station manually. The unit starts searching for an alternative station with a stronger signal in the same network. Note The "*" indication means that an RDS station is being received. Note When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF) repeatedly until "AF off" appears. Each time you press (AF), the item changes as follows: aF on y AF off Notes · When "NO AF" and the station name flash alternately, it means that the unit cannot find an alternative station in the network. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. If an emergency announcement comes in while you are listening to the radio, the programme will be automatically switched to it. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. The unit will then automatically switch to these announcements no matter which source you are listening to at the time. To cancel all traffic announcements, turn off the function by pressing (TA) until "TA off" appears. When you preset RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations. You can locate the station you want by selecting one of the programme types shown below. Press (MENU), then press either side of (DISC/PRST) repeatedly until "BTM" appears. Presetting different settings for each preset station " Press the desired number button ((1) to (6)) until "MEM" appears. Repeat from step 1 to preset other stations. [. . . ] The card remote commander does not function. Remove any obstacles blocking the signal path from the card remote commander to the unit. Point the card remote commander at the receptor on the unit. The MD is forcibly inserted upside down or in the wrong way. [. . . ]