User manual SONY MDX-C7890R

[. . . ] Playing tracks in random order -- Shuffle Play . ¡ Reset button (located on the front side of the unit hidden by the front panel) 5 !Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Align part A of the front panel to part B of the unit as illustrated, and push until it clicks. [. . . ] To go back to the normal mode, select "Mono off" in step 2 above. Each time you press (DSPL), the item changes as follows: 3 Repeat steps 1 and 2 to enter the entire name. To return to the normal radio reception, press (LIST) for two seconds. Tip To erase/correct a name, enter "_" (under-bar) for each character. Using the rotary commander the rotary commander works by pressing buttons and/or rotating controls. You can control the optional CD or MD unit with the rotary commander. Each time you press (DSPL), the item changes as follows: Tune in any station and press (LIST) for two seconds. Repeat steps 3 and 4 if you want to erase other names. Every time you press (SOURCE), the source changes as follows: Pressing (MODE) changes the operation in the following ways: Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander. Note Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. Rotate and hold the control until you locate the specific point in a track, then release it to start playback. If you press (DSPL) to change the display item, the disc or track name of the MD is scrolled automatically whether you set the function on or off. When a CD or MD unit is connected, all the tracks play from the beginning. Press (SHIFT), then press (2) (SET UP) repeatedly until "A. Each time you press (DSPL) during CD/MD playback, the item changes as follows: During playback, push the (SEEK/AMS) control up or down once for each track you want to skip. *2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name. ) *3 If the track name of an MD is not prerecorded, "NO T. Tip If the name of the MD is too long, you can scroll it across the display window by pressing (SHIFT), then (1) (N). During playback, push the (SEEK/AMS) control up or down and hold. Release when you have found the desired point. To search forward To search backward You can play the first 10 seconds of all the tracks on the currently selected disc. [. . . ] ⷠIf no sound comes from the speakers of two-speaker systems, set the fader control to the center position. ⷠIf your car is equipped with a power aerial, it will extend automatically while the unit is operating. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. Make sure that it is not left on the dashboard or rear tray of a car etc. [. . . ]