User manual SONY MDX-C8900R

[. . . ] Thank you for purchasing this Sony MiniDisc Player. This unit lets you enjoy a variety of features by using either a supplied rotary commander or an optional wireless remote. In addition to the MD playback and radio operations, you can expand your system by connecting an optional CD/MD unit*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play back a CD TEXT disc*2. [. . . ] In this case, close the window and try again. If you are far from the microphone, speak louder or come nearer to the microphone. The recording is completed by pressing (REC) again or leaving the unit untouched for 15 seconds. If you do not reply within three seconds after the vocalized instruction, the unit replies "Please speak now. " · When you are requesting a registered source, pronounce clearly and loudly to make it easier for the unit to recognize. When the unit has difficulty recognizing the phrase, register the vocal phrase again. The voice memos are recorded as "MEMO 1", "MEMO 2", etc. When a beep sounds and "MEMO FULL" appears, it means there is no room for additional voice memos. In such a case, erase the older recorded voice memos before recording new ones. Playing back the voice memo Using the rotary commander the rotary commander works by pressing buttons and/or rotating controls. You can control an optional CD or MD unit with the rotary commander. Select the desired voice memo using the SEEK/AMS control. Adjust the volume on the main unit or by using the rotary commander. The unit automatically returns to the previous source after playing back all of the voice memos. Playback stops and the unit automatically returns to the previous source. Each time you press (SOURCE), the source changes as follows: Play back the voice memo to be erased. Press and hold (PLAY) on the rotary commander until a beep sound is heard. Pressing (MODE) changes the operation in the following ways; Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander. The voice memo will be erased and the numbers of succeeding voice memos will move up respectively. Rotate and hold the control until you locate the specific point in a track, then release it to start playback. Press (PLAY) to play back the voice memo. If you need to mount the rotary commander on the right side of the steering column, you can reverse the operative direction. [. . . ] The unit is not installed in a sturdy part of the car. The station does not broadcast any traffic announcements despite being TP. Problem Registering a vocal phrase or recording a voice memo is not possible. The unit often fails or does not · The microphone may not be able to receive the driver's voice succeed in recognizing the vocal depending on the installation location and direction due to the phrase. [. . . ]