User manual SONY MDX-M690

[. . . ] Thank you for purchasing this Sony Compact Disc Player/Mini Disc Player. You can enjoy its various features even more with: · Supplied controller accessory Card remote commander RM-X111 Wireless rotary commander RM-X5S (CDXM770) · Optional controller accessories Wireless rotary commander RM-X5S (CDXM670, MDX-M690) Wired rotary commander RM-X4S (CDXM670, MDX-M690) *1 Some display indications do not appear in the language you select. *2 This unit works with Sony products only. This label is located on the bottom of the chassis. [. . . ] Tip There is another way to receive the preset service (preset on numbers 1 to 6). Press the number button ((1) to (6)) on which the desired service is stored. The unit will stop seeking when an ensemble is located. The unit will then automatically select the first service and display its name, and the display indicator will change from "Seek +"/"Seek ­" to the service name. Refer to the level indication to check the receiving condition of the DAB programme. The level indication increases as the strength of the receiving signal increases. Level 0 level 1 level 2 level 3 level 4 If you know the channel number of ensemble, follow the procedure below to tune in. Press M or m repeatedly until the desired channel number appears. The BTM (Best Tuning Memory) function picks out DAB ensembles and automatically assigns the services within the ensembles to preset service numbers. If you activate the BTM function while listening to a preset service, the unit will store detected services (by overwriting) only to preset numbers higher than that of the current present service. ⷠIf you activate the function while listening to a service that is not preset, the unit will replace the contents of all preset numbers. ⷠIn both cases above, if the unit detects a service that is identical to one already preset, the previously stored service remains unchanged and the newly detected service is not preset. You can also preset DAB services manually or delete a service which is already preset. Note that up to 40 services (preset either by the BTM function or manually) can be preset to the unit's memory. Press M or m repeatedly until "PRS Edit" appears, then press (ENTER). After activating the BTM function, the unit tunes the service assigned in the last smallest preset memory No. Note If the unit can only tune in a few services, the BTM function may not assign services to all the preset service numbers. To edit other services, repeat steps 3 and 4. Press M or m to select "Over Wrt" in step 4, then press (ENTER). Tip There is another way to preset the service (on numbers 1 to 6). After receiving the service, press the desired number button ((1) to (6)) until a beep sounds. Follow the procedure below to tune in a DAB programme manually. [. . . ] ⷠRemove the front panel and clean the connectors. see "Cleaning the connectors" (page 36) for details. Stored stations and correct time are erased. Makes noise when the ignition key is in the ON, ACC, or OFF position. [. . . ]