User manual SONY MEX-100NV

[. . . ] Use of the navigation unit is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or inconvenience will be incurred to you, your passengers or other road users. the requirements of the Road Traffic Regulations apply at all times. The destination must only be entered when the vehicle is stationary. the navigation system serves solely as an aid to navigation. [. . . ] Using the SELECT control, make a selection and confirm. Special destinations in the current surrounding area of the vehicle or special destinations near the destination can be selected. Special destinations TOWN / COUNTRY Special destinations of your choice in countries contained in the navigation CD can be selected. Destinations are listed according to proximity. The figures in kilometres relate to the direct distance (as the crow flies) between the special destination and the current location. The arrows following the distance information indicate the distance as the crow flies to the relevant special destination (e. Special destination lies in the direction of travel, special destination lies in the opposite direction to that of travel). Using the SELECT control, select either GERMANY (see page 83), TOWN or NATIONWIDE and press to confirm. Using the SELECT control, select the town name and press to confirm. Then select the town from the town selection list using the SELECT control and press again to confirm. The special destinations for the selected town are displayed. using the SELECT control , select a category and press to confirm. A list with special destinations is displayed or if there are more than 9 entries in the list, you will be requested to enter text. A list with special destinations is displayed or if there are more than 9 entries in the list, you will be requested to enter text. Enter the special destination and confirm. Note: A list of possible special destinations is displayed by pressing the SELECT control for more than 2 seconds without having selected any letters. Enter the special destination and confirm. Note: A list of possible special destinations is displayed by pressing the SELECT control for more than 2 seconds without having selected any letters. The star also enables recognition of the entry for setting a language, even if an unknown language is active. The display units can be changed from metres to yards. Can be made by turning, and confirmed by pressing the SELECT control. Whether ETA, the current time or the remaining travel time should be displayed on the right side of the display during navigation, is a setting option. [. . . ] In the Stations R DS plane, only identified RDS stations can be stored. the unit constantly switches to the best receivable transmission frequency for the station. During the search on Stations RDS the unit only stops at identifiable stations. This means that the transmitter broadcasts information which can be evaluated by the car radio. [. . . ]