User manual SONY MEX-1GP

[. . . ] Thank you for purchasing this Sony Network Audio System. You can enjoy your drive with the following functions. Front panel with built-in flash memory ­ GIGA PANEL You can play MP3/WMA files stored in the front panel with its built-in 1 GB flash memory. Audio files can be transferred from your computer to the front panel at high speed by USB connection. [. . . ] The corresponding buttons on the rotary commander control the same functions as those on this unit. Then, press again within 2 seconds and hold. The following controls on the rotary commander require a different operation from the unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers. Note When connecting a portable device, be sure BUS CONTROL IN is not connected. if a device is connected to BUS CONTROL IN , "AUX" cannot be selected as source. Tip When connecting both a portable device and a changer, use the optional AUX-IN selector. If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Be sure to adjust the volume for each connected audio device before playback. 4 Set your usual listening volume on the unit. 5 Press the select button repeatedly until "AUX" appears, and rotate the volume control dial to adjust the input level (±6 dB). If your car has been parked in direct sunlight, allow the unit to cool off before operating it. Power aerial will extend automatically while the unit is operating. Before playing, clean the discs with a commercially available cleaning cloth. The maximum number of: ­ folders (albums): 150 (including root and empty folders). ­ MP3/WMA files (tracks) and folders contained in a disc: 300 (if a folder/file names contain many characters, this number may become less than 300). The maximum number of: ­ folders (albums): 200 (including root and empty folders). ­ MP3/WMA files (tracks) and folders: 500 (if a folder/file names contain many characters, this number may become less than 500). When the disc is recorded in Multi Session, only the first track of the first session format is recognised and played (any other format is skipped). the priority of the format is CD-DA , ATRAC CD and MP3/WMA. ­ When the first track is a CD-DA, only CD-DA of the first session is played. ­ When the first track is not a CD-DA, an ATRAC CD or MP3/WMA session is played. [. . . ] NOT READ The disc information has not been read by the unit. READ The unit is reading all track and album/group information on the disc/flash memory. T Wait until reading is complete and playback starts automatically. Depending on the disc/flash memory structure, it may take more than a minute. [. . . ]