User manual SONY MEX-BT2900

[. . . ] Be sure to install this unit in the dashboard of the car for safety. Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. the Authorized Representative for EMC and product safety is Sony Deutschland GmbH , Hedelfinger Strasse 61 , 70327 Stuttgart , Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. [. . . ] />) [press once for each track] SEEK ­/+ (. Note When disposing of this unit, preset numbers should be deleted with "BT INIT. *2 Depending on the device, it may be necessary to press twice. Operations other than the above should be performed on the audio device. notes · Depending on the audio device, its information, such as title, track number/time, playback status, etc. Even if the source is changed on this unit, playback of the audio device does not stop. Tip You can connect a cellular phone that supports A2DP (Advanced Audio Distribution Profile) as an audio device and listen to music. Sound Settings and Setup Menu Changing the sound settings "CUSTOM" of EQ3 allows you to make your own equalizer settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. The following items can be set (follow the page reference for details): EQ3 Selects an equalizer curve from 7 music types (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). LOW*1, MID*1, HI*1 (page 22) BAL (Balance) Adjusts the sound balance between the left and right speakers. FAD (Fader) Adjusts the relative level between the front and rear speakers. sUB*2 (Subwoofer volume) Adjusts the subwoofer volume. AUX*3 (AUX level) Adjusts the volume level for each connected auxiliary equipment: "+18dB" ­ "0dB" ­ "­ 8dB. " This setting negates the need to adjust the volume level between sources. BTA*4 (Bluetooth-Audio level) Adjusts the volume level for each connected Bluetooth audio device: "+18dB" ­ "0dB" ­ "­ 8dB. " This setting negates the need to adjust the volume level between sources (page 20). Rotate the control dial until the desired item appears, then press it. * For CLOCK-ADJ and BTM settings, step 4 is not necessary. The following items can be set (follow the page reference for details): CLOCK-ADJ (Clock Adjust) (page 7) CT (Clock Time) Activates the CT function: "ON, " "OFF" (page 14, 15). AUTO OFF Shuts off automatically after a desired time when the unit is turned off: "NO, " "30S (Seconds), " "30M (Minutes), " "60M (Minutes). " LOCAL (Local Seek Mode) ­ "ON": to only tune into stations with stronger signals. [. . . ] The calling phone is not set to send the phone number. The connecting phone is set to answer a call automatically. Try completing the pairing within the time. Turn off the unit by pressing (SOURCE/OFF) for more than 2 seconds, then turn the unit on again. [. . . ]