User manual SONY MEX-BT31PW

[. . . ] 4-427-433-21(1) Bluetooth® Audio System Operating Instructions GB Manual de instrucciones ES Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. To cancel the demonstration (DEMO) display, see page 7. [. . . ] The contact is stored in the selected preset number. Voice dial activation You can activate voice dialing with a cellular phone connected to this unit by saying the voice tag stored on the cellular phone, then make a call. If there are any unread SMS messages, the SMS indicator stays lit. 1 2 Press  and rotate the control dial until “VOICE DIAL” appears, then press it. Say the voice tag stored on the cellular phone. Your voice is recognized, and the call is made. Note Function of the SMS indicator may depend on the cellular phone. 25 Music streaming Listening to music from an audio device You can listen to music from an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology. 6 Press (BACK) to return to the previous display. Operating an audio device with this unit You can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. (The operation differs depending on the audio device. ) To Do this Skip albums Repeat play Press / (ALBUM /) [press once for each album] Press  (REP)*1 Press  (SHUF)*1 Press  (PAUSE)*2 on this unit. press  (PAUSE)*2 on this unit. Press  –/+ (/ ) [press once for each track] Press and hold  –/+ (/) [hold to desired point] 1 2 3 4 Turn down the volume on this unit. shuffle play Play Pause Skip tracks Changing display items Press . Adjusting the volume level The volume level is adjustable for any difference between the unit and the Bluetooth audio device. reverse/ Fast-forward *1 Press repeatedly until the desired setting appears. *2 Depending on the device, it may be necessary to press twice. 1 2 3 4 5 Start playback of the Bluetooth audio device at a moderate volume. Set your usual listening volume on the unit. Press , rotate the control dial until “SOUND” appears, then press it. Rotate the control dial until “BTA VOL” appears, then press it. [. . . ] 42 MEM FAILURE (Memory Failure)  This unit failed to store the contact in the preset dial. € Make sure that the number you intend to store is correct (page 25). ΅ Bluetooth phone source is selected without a cellular phone connected. A cellular phone has been disconnected during a call. [. . . ]