User manual SONY MEX-BT5000

[. . . ] Be sure to install this unit in the dashboard of the car for safety. Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. The BBE MP process improves digitally compressed sound, such as MP3, by restoring and enhancing the higher harmonics lost through compression. [. . . ] ­ "Auto" (z): to dim the display automatically when you turn lights on. Push the joystick up/down until the desired setting item appears, then push it right. the digital indication moves to the right (setting selection) side. Push the joystick up/down to select the setting, then press it. You can go to the next menu level by pressing the joystick. In step 5, push the joystick left until "EXIT" appears, then press the joystick, instead of pressing (MENU). You can enter the Sound setting menu directly by pressing (SOUND) on the card remote commander. The following items can be set (follow the page reference for details): "z" indicates the default settings. ­ "NORM" (z): to use the rotary commander in the factory-set position. ­ "REV": when you mount the rotary commander on the right side of the steering column. ­ "on": to only tune into stations with stronger signals. The larger the number, the more enhanced the effect. Balance To adjust the balance between the right and left speakers: "R10" ­ "±0" (z) ­ "L10" Fader To adjust the balance between the front and rear speakers: "F10" ­ "±0" (z) ­ "R10" Subwoofer To adjust the subwoofer volume: "+10" ­ "±0" (z) ­ "­10" ("­ " is displayed at the lowest setting. ) LPF (Low Pass Filter) To select the subwoofer cut-off frequency: "off" (z) , "125Hz" or "78Hz. " AUX Level To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources (page 22). adjustable level: "+6 dB" ­ "±0 dB" (z) ­ "­6 dB" * When the unit is turned off. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. Repeat steps 4 to 7 to adjust other frequencies. "Custom" of EQ3 allows you to make your own equalizer settings. And hold within 2 seconds of first releasing. Then push again within 2 seconds and hold. [. . . ] NO Group Name A group name is not written in the track on the ATRAC CD. T Insert a music CD in this unit or MP3 playable changer. nO TP The unit will continue searching for available TP stations. NO Track Name A track name is not written in the track. [. . . ]