User manual SONY MEX-BT5100

[. . . ] Be sure to install this unit in the dashboard of the car for safety. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. the recycling of the materials will help to conserve natural resources. [. . . ] To clear all devices in the selection list, select "Delete All" in step 4. If your car's ignition switch is set to the ACC position, this unit reconnects automatically to the last connected Bluetooth device. Push the joystick up/down until the desired menu item appears, then push it right. ­ "SpaceProducer" (z): to create animated onscreen patterns in time with the music. ­ "off": to not display any image. ­ "All": to step repeatedly through the display images in all display modes. ­ "SA All"/"Movie All"/"Wallpaper All": to step repeatedly through the display images of each mode. ­ "Simple" (z): to not display any items. ­ "Auto" (z): to dim the display automatically when you turn lights on. Push the joystick up/down until the desired setting item appears, then push it right. the digital indication moves to the right (setting selection) side. Push the joystick up/down to select the setting, then press it. You can go to the next menu level by pressing the joystick. In step 5, push the joystick left until "EXIT" appears, then press the joystick, instead of pressing (MENU). You can enter the Sound setting menu directly by pressing (SOUND) on the card remote commander. The following items can be set (follow the page reference for details): "z" indicates the default settings. ­ "NORM" (z): to use the rotary commander in the factory-set position. ­ "REV": when you mount the rotary commander on the right side of the steering column. ­ "on": to only tune into stations with stronger signals. The larger the number, the more enhanced the effect. Balance To adjust the balance between the right and left speakers: "R10" ­ "±0" (z) ­ "L10" Fader To adjust the balance between the front and rear speakers: "F10" ­ "±0" (z) ­ "R10" Subwoofer To adjust the subwoofer volume: "+10" ­ "±0" (z) ­ "­10" ("­ " is displayed at the lowest setting. ) LPF (Low Pass Filter) To select the subwoofer cut-off frequency: "off" (z) , "125Hz" or "78Hz. [. . . ] If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI Seek" appears). NO Group Name A group name is not written in the track on the ATRAC CD. T Insert a music CD in this unit or MP3 playable changer. [. . . ]