User manual SONY MEX-DV800

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ] With AF or TA on, the emergency announcements will automatically interrupt the currently selected source. Tip If you adjust the volume level during a traffic announcement, that level will be stored into memory for subsequent traffic announcements, independently from the regular volume level. When the AF function is on: this unit's factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional program's reception area, set "REG-OFF" in system setup during FM reception (page 42). Note This function does not work in the UK and in some other areas. Note You cannot use this function in countries/regions where no PTY data is available. This function enables you to select other local stations in the area, even if they are not stored on your number buttons. 1 During FM reception, press a number button ((1) to (6)) on which a local station is stored. 2 Within 5 seconds, press again a number button of the local station. Repeat this procedure until the local station is received. The CT function may not work even though an RDS station is being received. There might be a difference between the time set by the CT function and the actual time. "CUSTOM" of EQ3 allows you to make your own equalizer settings. You can adjust the level of 3 different bands: "LOW, " "MID, " and "HI. During playback/reception, press (SOUND) repeatedly until "EQ3" appears. The level is adjustable in single steps, between ­10 and +10. You can adjust the sound characteristics according to your preference. The setting items in the sound menu and switching order are indicated below. EQ3: Selects an equalizer curve from 7 music types. lOW , MID , HI*: Adjusts the volume level of the selected band for EQ3 custom setting. BAL (Balance): Adjusts the sound balance between the left and right speakers. FAD (Fader): Adjusts the relative level between the front and rear speakers. [. . . ] The picture data is compressed to about 1/40 (average) of its original size. The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture. Audio information is recorded in a multichannel format, such as Dolby Digital, allowing you to enjoy a more real audio presence. Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental Control functions are provided with the DVD. [. . . ]