User manual SONY MFM-HT95

[. . . ] 2-345-277-01(1) LCD Multi Function Display MFM-HT75W MFM-HT95 © 2004 Sony Corporation Owner's Record The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. Model No. NOTICE This notice is applicable for USA/Canada only. [. . . ] · Off: Turns off the SRS WOW effect. Select Set OK Exit MENU 4 Adopting the latest technology developed by SRS Labs, Inc. , SRS WOW significantly improves the sound quality of various audio sources. Press the M/m buttons to select the desired mode and press the OK button. · On: Loudness of the sound stays at the specified level, independent of the broadcast signal (e. g. · Off: Loudness of the sound changes automatically according to the broadcast signal. 21 x Setting "MTS" (for TV only) You can enjoy stereo, bilingual, and monaural programs. Press the M/m buttons to select (Audio) and press the OK button. The "Audio" menu appears on the screen. Press the M/m buttons to select "MTS" and press the OK button. The "MTS" menu appears on the screen. Audio Surround: Treble: Bass: Balance: Auto Volume: MTS: Audio Reset SRS WOW 0 0 0 On Stereo Auto SAP Mono : TV Screen menu You can adjust the following items using the "Screen" menu. · Zoom HD15: PC 2 Screen · Auto Adjust Zoom : Auto Adjust · Phase Phase : 30 Pitch : 0 · Pitch H Center : 50 V Center : 50 · H Center · V Center 1280 × 1024/60 Hz Select Set OK 2 3 Exit MENU x Setting "Zoom" This feature lets you watch 4:3 normal broadcasts or other picture sizes such as Letter box movies in several "Zoom" modes. A "Zoom" value is set for each available input. Tip You can also switch the "Zoom" setting by pressing the remote control repeatedly. Select Set OK Exit MENU button on the 4 Press the M/m buttons to select the desired mode and press the OK button. · Stereo: Stereo sound is output when viewing a program broadcast in stereo. · Auto SAP: A second audio program channel is output automatically when a signal received. (If no SAP signal is present, the display remains in stereo mode. ) · Mono: Monaural sound is output. (Use to reduce noise during weak stereo broadcasts. ) 1 Press the MENU button. Press the M/m buttons to select (Screen) and press the OK button. The "Screen" menu appears on the screen. Press the M/m buttons to select "Zoom" and press the OK button. The "Zoom" menu appears on the screen. MFM-HT75W Screen : TV Zoom : Auto Adjust Phase : Pitch : H Center : V Center : Normal Full Wide Zoom Zoom 2 3 x Resetting all audio settings to the default You can reset the adjustments to the default settings. Press the M/m buttons to select (Audio) and press the OK button. The "Audio" menu appears on the screen. Press the M/m buttons to select "Audio Reset" and press the OK button. The "Audio Reset" menu appears on the screen. Audio Surround: Treble: Bass: Balance: Auto Volume: MTS: Audio Reset SRS WOW 0 0 0 On Stereo OK Cancel : TV 3 Select Set OK Exit MENU MFM-HT95 Screen Zoom : Auto Adjust Phase : Pitch : H Center : V Center : Normal Full 16 : 9 : TV Select Set OK Exit MENU Select Set OK Exit MENU 4 Press the M/m buttons to select the desired mode and press the OK button. · OK: To reset the all items in the "Audio" menu to the default. [. . . ] Press the MENU button to display the menu screen, and confirm that the resolution and refresh rate (vertical frequency) displayed in the lower right corner of the menu screen are 1280 × 768/60 Hz. If other than this value is displayed, replace this display with the display that was connected before and set the video output setting of the computer to 1280 × 768/60 Hz. If 1280 × 768/60 Hz is unavailable, the graphics board on the computer may not be supported by this display. 39 For TV/VIDEO 1/VIDEO 2 Symptom No picture. · Make sure the power cord is connected securely. [. . . ]