User manual SONY MHC-1600

[. . . ] This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. This caution label is located inside the unit. NOTICE FOR THE CUSTOMERS IN CANADA CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. This stereo system is equipped with the Dolby Btype noise reduction system and Dolby Pro Logic Surround decoder*. [. . . ] When programming, make sure the playing times for each side do not exceed the length of one side of the tape. (Power) 1 2 3 4 5 Place a CD and insert a blank tape into deck B. Press FUNCTION repeatedly until "CD" appears in the display. Press PLAY MODE repeatedly until "PROGRAM" appears in the display. Press one of the DISC 1~3 buttons to select a CD. Turn the jog dial until the desired track appears in the display. Disc number SYNC 3 4 11, EDIT 1 Total playing time (including selected track) VOLUME ALL 1 DISCS PROGRAM SHUFFLE REPEAT 1 STEP ß Track number 6 Press ENTER/NEXT. The track is programmed. The program step number appears, followed by the total playing time. 2 · p 56 10 12 7 To program additional tracks to be recorded on side A, repeat steps 4 to 6. Skip step 4 to select tracks from the same disc. CHECK ª· ª· = 0 · + ) P p P p 8 Press P on the remote to insert a pause at the end of side A. "P" appears in the display and the total playing time resets to "0. 00" in the display. 8 30 9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B. Selecting tape length automatically --Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 10 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ( (for front side) lights up. 1 2 3 Insert a CD. Press FUNCTION repeatedly until "CD" appears in the display. Press EDIT once, so that "EDIT" flashes. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. 11 Press DIRECTION repeatedly to select A to record on one side. Select ß (or RELAY) to record on both sides. 12 Press P PAUSE. Recording starts. To stop recording Press p. They can be used with any source, to create original recordings. / Press BEAT ON/OFF during playback at the point you want to start the beat. The button's indicator lights up. To change the speed Turn the jog dial while holding BEAT SPEED (or press SPEED ?or / on the remote) to select the speed you desire (BPM 60~160). (Power) BEAT LEVEL Jog dial To change the beat pattern Turn the jog dial while holding BEAT SELECT (or press SELECT > or . on the remote) to select the pattern you desire. The name of the beat pattern appears in the display. . 8 BEAT 1 < · · · < SLAM > To cancel the beat Press BEAT ON/OFF. Make sure the button's indicator turns off. BEAT BEAT BEAT BEAT AUTO BPM ON/OFF SELECT SPEED JAM To change the beat volume Press BEAT LEVEL repeatedly to select the level you desire. Each time you press the button the level changes as follows: LEVEL 1 / LEVEL 2 / LEVEL 3 / LEVEL MAX / LEVEL 1 . Tips · You can use the drum pads and the beat function together. · Press DEMO while the power is on to hear all drum sounds and beat patterns played repeatedly. Press any (except BEAT LEVEL) key to stop. · ª· ª· = 0 · + ) P p P p SELECT >/. SPEED ?// BEAT ON/OFF 34 Using the BEAT JAM function This function automatically synchronizes the sounds of PAD A and B with the sound source. Using the AUTO BPM function This function automatically synchronizes the rhythm of the current beat pattern with the sound source. 1 2 Start playing a source. Press BEAT JAM repeatedly to select the jam mode you desire. The button's indicator lights up. [. . . ] Clean them (see "Cleaning the tape heads" on page 50). ·The record/playback heads are magnetized. Demagnetize them (see "Demagnetizing the tape heads" on page 50). ·The record/playback heads are magnetized. [. . . ]