User manual SONY MHC-DX3

[. . . ] The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] After the last track, "CHECK END" appears. Press PLAY MODE repeatedly until "PGM" or "SHUFFLE" disappears from the display. With the Loop function, you can repeat part of a CD during playback. This lets you create original recordings. With the Flash function, you can "flash" the CD sound during playback. This lets you create original recordings. During playback at the point you want to start the Loop function, and release to resume normal play. to adjust the loop length Press MENU +/­ on the remote while pressing LOOP to select different loop lengths (LOOP 1~20). Remote during playback at the point you want to start the Flash function, and release to resume normal play. to adjust the flash length Press MENU +/­ on the remote while pressing FLASH to select different flash lengths (FLASH 1~20). To use LOOP and FLASH together The loop and flash length cannot be adjusted during this operation. You can reinforce the bass, create a more powerful sound, and listen with headphones. The audio emphasis menu lets you select the sound characteristic according to the type of music you are listening to. Selecting the effect from the music menu The volume switches to power mode, the equalizer curve changes, and the GROOVE button lights. Press GROOVE again to return to the previous volume. You can enjoy changing the display while listening to the music. "SURROUND" appears if you select an effect with surround effects. Every time you press the button, the display changes as follows: t SPECTRUM 1 x SPECTRUM 2 x SPECTRUM 3 x IMAGE PATTERN x SPECTRUM OFF* Put your finger in the hollow and move in the direction you want (v/V/b/B). You can adjust the sound by raising or lowering the levels of specific frequency ranges. Before operation, first select the audio emphasis you want for your basic sound. Every time you press the button, the display changes as follows: SURROUND ON (SURROUND) Y SURROUND OFF (off) When you choose other sound effect, the surround effect will be canceled. (When using the remote, press ON/ OFF to activate the equalizer effect and press MENU +/­ repeatedly until "USER FILE" appears in the display. [. . . ] Turn off the TV set once, then turn it on after 15 to 30 minutes. /1 to turn off the power, leave the system turned off for a while, then press ?If "PROTECT" and "PUSH POWER" appear alternately even after the power is turned on again, press ?/1 to turn off the power and check the speaker cord. [. . . ]