User manual SONY MHC-DX5

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This caution label is located inside the unit. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] If you press DISPLAY/DEMO again, the clock display appears for eight seconds then the display returns to the previous indication. * You can't repeat a single track during Shuffle Play and Program Play. Playing the CD tracks in random order â­Â­ Shuffle Play You can play all the tracks on one CD or all CDs in random order. Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order. You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select "SHUFFLE". â· To skip a track, turn the jog dial clockwise (or press + on the remote). Press FUNCTION repeatedly until "CD" appears in the display, then place a CD. "J" appears and then all the tracks play in random order. You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. Turn the jog dial until the desired track appears in the display. To record the flash effect, use the analog (VIDEO/ MD OUT) connections or this unit's tape deck. With the Wave function, you can fluctuate the graphic equalizer automatically. This effect can be used with any source, but it cannot be recorded. Turn the jog dial while holding WAVE to select a different wave length (WAVE 1~10). You can reinforce the bass, create a more powerful sound, and listen with headphones. With some songs, the music will sound distorted when you use the DBFB system with the graphic equalizer if the bass is too strong. Adjust the bass slowly while listening to music so that you can monitor the effect of the adjustment. To cancel the DBFB level, press DBFB until the indication disappears. Every time you press the button, the display changes as follows: DBFB n DBFB n display off "DBFB "DBFB n " is more effective than ". The volume switches to power mode, DBFB is automatically set to full strength, the equalizer curve changes, and the "GROOVE" button lights up. Press GROOVE again to return to the previous volume. [. . . ] Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. Move the stereo system away from the TV or VCR. DAILY1, DAILY 2, and REC do not appear when you press the TIMER SELECT button. There is an obstacle between the remote and the system. [. . . ]