User manual SONY MHC-DX60AV

[. . . ] This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. this symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Owner's Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. [. . . ] If the indicator for the disc tray containing the CD you want to record is not lit green, press DISC SKIP EX-CHANGE repeatedly so that it lights green. Into deck B with the side you want to record on facing forward. Recording will start from the front side of the tape, unless you have changed the playing direction before recording. Make sure the tabs on the cassette have not been removed. Then, press § OPEN/CLOSE again to close the disc tray. If the button for the disc tray containing the CD you want to record is not lit green, press DISC SKIP EX-CHANGE repeatedly so that it lights green. Use the buttons on both the unit and the remote to do this operation. You cannot select "HALF" when you want to record CD which has more than 20 tracks. Then, press § OPEN/CLOSE again to close the disc tray. If the button for the disc tray containing the CD you want to record is not lit green, press DISC SKIP EX-CHANGE repeatedly so that it lights green. Then the display changes as follows: 6 When you want to record on both sides, When you want to record only on side A, press on the CD player to stop the indication from flashing. You can record from the tuner onto a tape. And 4 to 6 from another CD to program the remaining tracks you want to record on side B in the order you want them to be recorded. Tape into deck B with the side you want to record on facing forward. Recording will start from the front side of the tape, unless you have changed the playing direction before recording. Make sure the tabs on the cassette have not been removed. Into deck B with the side you want to record on facing forward. Recording will start from the front side of the tape, unless you have changed the playing direction before recording. Make sure the tabs on the cassette have not been removed. 2 Press TUNER/BAND several times until After about 10 seconds, the CD starts playing. Each time you press CHECK, the number of the programmed tracks appear in the display. Then, press § OPEN/CLOSE again to close the disc tray. [. . . ] When you are using a TYPE II (CrO2) or TYPE IV (metal) cassette, be careful not to cover the detector slots which allow the tape player to automatically detect the type of tape. If you have any questions or problems concerning your stereo system, please consult your nearest Sony dealer. Leave the system turned on for about an hour until the moisture evaporates. Play does not start from the first track. [. . . ]