User manual SONY MHC-EC55

[. . . ] The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. [. . . ] The system can only play MP3 files that have a file extension of ". MP3" file extension, but that are not MP3 files, the unit may produce noise or may malfunction. The maximum number of: loadable sessions on a single disc is 10. MP3 files and folders that can be contained on a single disc is 300. folder levels (the tree structure of files) is eight. Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all. The following are not displayed; total playing time for an MP3 disc. remaining playing time for an MP3 file. The following are not displayed correctly; elapsed playing time of an MP3 file encoded using a VBR (variable bit rate). Folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. The following are displayed; total playing time for a CD-DA disc when the play mode is "1 DISC". ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used (ID3 version 2 tag information display has priority when both ID3 version 1 and version 2 tags are used for a single MP3 file). Up to 15 characters of ID3 tag information using uppercase letters (A to Z), numbers (0 to 9), and symbols (`< > * + , ­ / @ [ \ ] _). Use buttons on the remote to create your own program. You can record just the portions you like from a sound source, including connected audio components. Use buttons on the unit to control tape recording. 1 Make sure the power cord and speaker cords are Discs that have labels printed using ink that feels tacky when touched AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (MHC-GX99, MHC-EC77 The United States model only) Low channel With 8 ohm loads, both channels driven, from 120 ­ 10, 000 Hz; 60 watts per channel minimum RMS power, with no more than 0. 7% total harmonic distortion from 250 milliwatts to rated output. High channel With 8 ohm loads, both channels driven, from 2, 000 ­ 13, 000 Hz; 60 watts per channel minimum RMS power, with no more than 0. 7% total harmonic distortion from 250 milliwatts to rated output. AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (MHC-EC55 The United States model only) With 6 ohm loads, both channels driven, from 120 ­ 10, 000 Hz; 45 watts per channel minimum RMS power, with no more than 0. [. . . ] 5 Repeat steps 1 through 4 to store other stations. you can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. The following discs take a longer time to start playback. [. . . ]