User manual SONY MHC-EC69I/C2 DATASHEET

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This caution label is located inside the unit. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Do not put your hand inside the compartment nor change the disc before the rotary table comes to a complete stop. If you do, you may injure your hand or damage the disc. Turn the jog dial until the disc number to which you want to label appears. When you label a disc with the front cover closed, the disc number of the disc at the playing position appears. When you label a disc with the front cover open, the disc number at the loading position appears. Turn the jog dial until the desired character appears. the cursor disappears and the first space for the disc title flashes. To select characters on the unit As you turn the jog dial clockwise, the characters appear in the following order. Turn the jog dial counterclockwise to go back to the previous character. To select characters on the remote Press V or v until the desired type of charecter appears, then press B or b until the desired character appears. The disc title stores the number of the slot in which the CD was inserted. Some CD-TEXT discs have a feature to play only the highlights of the discs. Press the B or b key on the remote until the disc title in step 4 that you want appears. If there is no more disc title starting with the input character in Step 4, the input character changes to the next one when you turn the jog dial. During play of disc highlights, you can return to normal play by pressing · During play of disc highlights, you can move to an earlier or later highlight song by pressing/ ± on the remote. During play of disc highlights, you can use Repeat Play function. To repeat all the highlight songs, keep pressing REPEAT until "REPEAT" appears. To repeat only the current highlight song, keep pressing REPEAT until "REPEAT 1" appears. If you press HI-LIGHT while selecting discs without this feature, "NO HIGHLIGHT" appears in the display. You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. If you want to record from the reverse side, press TAPE B ª so that ª (for reverse side) lights up. [. . . ] The display starts flashing as soon as you plug in the power cord even though you haven't turned on the power (demonstration mode). Press DISPLAY/DEMO when the power is turned off. The demonstration mode appears automatically the first time you plug in the power cord. If there is a power outage lasting longer than half a day, redo the following: -- Clock setting (see "Step 2: Setting the time") -- Preset stations (see "Step 3: Presetting radio stations") -- Timer settings (see "Waking up to music" and "Timer recording radio programs"). [. . . ]