User manual SONY MHC-EC909IP

[. . . ] Note on DualDiscs MHC-EC909iP A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Getting Started Speakers To right speaker To left speaker To subwoofer AM loop antenna FM lead antenna (Extend it horizontally. ) To wall outlet To adjust the volume To set the clock Connect the speaker cords to the SPEAKERS jacks. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Press VOLUME +/ (or turn the VOLUME control on the unit) . Power Connect the power cord to a wall outlet. [. . . ] This function works even if the clock is not set. If you select "AUTO, " the system automatically turns off after the current disc stops, or within 100 minutes. the indicated corrective action. If the issue persists, contact your nearest Sony dealer. There is no sound. If "PROTECT" appears on the display Make sure the iPod/iPhone is connected securely. Make sure the iPod/iPhone is playing music. Adjust the volume. To delete the last track or file of the program Press CLEAR while the player is stopped. Play Timer: 3 Start playback. Press (or on the unit) . To view program information, such as total track number of the program Press DISPLAY repeatedly. You can wake up to CD, FM/AM reception, iPod or iPhone at a preset time. Make sure you have set the clock. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific CD track or audio file, create your own program. Immediately unplug the power cord, and check if anything blocking the ventilation holes on the back of the system after "PROTECT" disappears. After you have checked the ventilation holes and found to be all right, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. The sound is distorted. Turn down the volume. Set the "EQ" setting of the iPod/iPhone to "Off " or "Flat. " Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. Compatible iPod/iPhone models: iPhone 3GS iPhone 3G iPhone On heat buildup The iPod/iPhone cannot be charged. To control the iPod/iPhone To Pause playback General The system does not turn on. Is the power cord plugged in? Make sure the iPod/iPhone is connected securely. The iPod/iPhone is charged only when the system is on. You can control your iPod/iPhone with the following buttons on the remote or unit. Press (pause) (or (play/pause) on the unit) or (stop) . You can scroll up or down the iPod menus much like the Click Wheel operations of the iPod or the drag up-or-down operations of the iPod touch/ iPhone. To fast-forward or fast-rewind, hold down the button. Using optional audio components 1 Prepare the sound source. Connect additional audio component to the PC IN jack on the unit using an audio analog cord (not supplied). "OVER CURRENT" appears. Heat buildup on the unit during operation is normal and is not cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Do not obstruct the ventilation holes. iPod nano 5th generation (video camera) iPod touch 2nd generation iPod classic 120GB 160GB (2009) 2 Select the timer set mode. Press TIMER MENU . 3 Set the play timer. Press / repeatedly to select "PLAY SET, " and . then press "ON TIME" appears, and the hour indication flashes. There is no sound. Scroll up/down the iPod menus 2 Turn down the volume. Press VOLUME (or turn the VOLUME control on the unit) . Are you using only the supplied speakers? Is anything blocking the ventilation holes on the back of the system? A problem has been detected with the level of electrical current from the iPod/iPhone connector. Turn off the system and remove the iPod/iPhone from the iPod/ iPhone connector. Make sure there is no problem with the iPod/iPhone. [. . . ] Use buttons on the unit to reset the unit to its factory default settings. 1 Disconnect and reconnect the power cord, and then turn on the system. The system offers the following display modes. Display mode Power Saving Mode1) When the system is off, The display is turned off to conserve power. The timer and clock continue to operate. The clock is displayed. Connect the antenna properly. Find a location and an orientation that provide good reception, and then set up the antenna again. [. . . ]