User manual SONY MHC-F150

[. . . ] The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] Playing a group Press the group key corresponding to the group you want to play. To switch to another disc in the same group Press the corresponding group key again to turn off its indicator. When a CD is filed in a group, the GROUP FILE and respective group number indicators appear in the display whenever that CD is selected. To enter a name for a group, select the corresponding group number in step 3 of "Labeling a CD" (on page 33) and perform the subsequent operations to enter the name you desire. To delete a disc from a group do steps 2 and 3 of "Filing a disc" then press CLEAR. "GROUP ERASE" appears momentarily and the group file number indicator goes out. To delete all discs from a group at once While holding down a group key you want to clear, press CLEAR. Press a group key to file the disc into the respective group. "GROUP FILE" appears momentarily and the respective group file number indicator lights up. (If the same disc was previously filed into a different group, the new group file number replaces the previous one. Group file number indicators (When disc assigned to group 3) You can label each disc using up to 11 characters. When you select a CD-TEXT disc, the first 11 characters of the disc title are stored as a disc memo. To label a group (1~5) instead of the current disc, turn the jog dial to display the corresponding group number. Turn the jog dial until the desired character appears. the cursor disappears and the first space for the disc title flashes. To select characters on the unit Turn the jog dial to the left or right. To select characters on the remote Press V or v until the desired type of character appears, then press B or b to select the desired character. Repeat steps 5 and 6 to input more characters. If you make a mistake Press =/0 or )/+ to move the cursor to the position you want to correct, then use the jog dial to select the appropriate character or press DELETE to remove the character. Turn the jog dial until the disc number to which you want to label appears. When you label a disc with the front cover closed, the disc number of the disc at the playing position appears. When you label a disc with the front cover open, the disc number at the loading position appears. [. . . ] Move the microphone away form the speakers or change the direction of the microphone. Turn off the TV set once, then turn it on after 15 to 30 minutes. Remove the CD and leave the system turned on for about an hour until the moisture evaporates. Play does not start from the first track. [. . . ]