User manual SONY MHC-F50

[. . . ] The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] To select characters on the unit As you turn the jog dial clockwise, the characters appear in the following order. Turn the jog dial counterclockwise to go back to the previous character. To select characters on the remote Press V or v until the desired type of charecter appears, then press B or b until the desired character appears. The disc title stores the number of the slot in which the CD was inserted. Rewrite the disc title when inserting a new CD into that slot. Follow Steps 2 and 3 in "Labeling a CD" on page 26 to select the disc name you want to erase. While holding down LOOP/DELETE, press CLEAR. When you replace a disc with a CD-TEXT disc, the disc title of the CD-TEXT disc is restored automatically. The disc title for the CD-TEXT disc is no longer stored when the CD is removed. You can label discs while the front cover is open. If you have made a mistake Press LOOP/DELETE. The character 1 space before the cursor disappears and the cursor flashes. Repeat Steps 4 and 5 to input more characters. Repeat Steps 2 to 7 to label other discs. Press ENTER when the disc title of the disc you want to play appears. The disc is set to the playing position, and the player starts playing. Try the Memo Scan function again after labeling the discs. You can search and locate a disc you want by inputting the first character used in the disc title (see page 26). You can locate a disc you want to play quickly by scanning the disc title (see page 26) in the display and start playing. Note that you cannot use this function in the ALL DISCS Shuffle Play mode. Each time you press /±, the characters appear in the following order. ABCDEFGHIJKLMNOPQRST UVWXYZ0123456789 If "[A] NOT FOUND" appears in the display while inputting the first character with the /± buttons, no disc has been labeled using the input character. [. . . ] Insert only the stripped portion of the speaker cord into the SPEAKER jack. Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. Sound comes from one channel or unbalanced left and right volume. There is no sound from the surround speakers (for MHC-F100/MHC-FR1 only). [. . . ]