User manual SONY MHC-GNZ888D

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] When you perform QUICK SETUP (page 23), the default settings are changed. 4) If each left and right speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. 5) The setting range changes depending on the front speaker setting. 6) The items that are set to "NONE" in "CONNECTION" cannot be selected. 7) This setting cannot be selected when "SURROUND" is set to "NONE" in the "CONNECTION" setting. 8) When you adjust the speaker settings, the sound may cut off for a moment. 9) The test tone is not emitted from the subwoofer. The stations are stored from preset number 1. You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. The frequency indication changes and then release. "AUTO" lights up in the display. Scanning stops automatically when a station is tuned in and "TUNED" lights up in the display. When a FM stereo program is tuned in, "STEREO" lights up in the display. If the scanning does not stop, press TUNING +/­ repeatedly to tune in the station you want. The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. OPERATION DIAL > on the unit clockwise or counterclockwise) to select the preset station you want. You can also press the numeric buttons, then press ENTER to select a preset station. You can use manual tuning to tune in a station with a weak signal and direct tuning if you know the frequency of the station. (Except for Saudi Arabian and Russian models) The factory setting for AM tuning interval is 9 kHz (or 10 kHz for some areas). Use the buttons on the unit for the operation. Down ILLUMINATION and then press "/1 STANDBY to turn on the system. "AM 9K STEP" or "AM 10K STEP" appears in the display. [. . . ] Film based DVD VIDEOs contain the same images (24 frames per second) that are shown at movie theaters. Each frame is scanned twice-alternately between the even numbered scanning lines and then odd numbered scanning lines, at 60 times per second. Various angles, or viewpoints of the video camera, for a scene are recorded on some DVD VIDEOs. DVD-RWs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. [. . . ]